Jatco/Nissan JF016E (RE0F10D), JF017E (RE0F10E) - Transmission Digest

Jatco/Nissan JF016E (RE0F10D), JF017E (RE0F10E)

Jatco/Nissan JF016E (RE0F10D), JF017E (RE0F10E) critical wear areas and vacuum test locations

Tasc Force Tips

  • Author: Sonnax
  • Subject Matter: JF016E, JF-17E

Critical Wear Areas & Vacuum Test Locations

NOTE: OE valves are shown in rest position and should be tested in rest position unless otherwise indicated. Test locations are pointed to with an arrow. Springs are not shown for visual clarity.

A low vacuum reading indicates wear. For specific vacuum test parameters, refer to additional information available at www.sonnax.com.

You May Also Like

GM 6T40 Pump Identification Guide

The 6T40 was introduced in 2008 for General Motors front-wheel-drive cars in the Chevrolet Malibu and has gone through several changes throughout its three generations, specifically in the pump area. The 6T40 is closely related to the more lightweight 6T30 and the heavier duty 6T45 and 6T50. Generation one started phasing out during the 2012

The 6T40 was introduced in 2008 for General Motors front-wheel-drive cars in the Chevrolet Malibu and has gone through several changes throughout its three generations, specifically in the pump area. The 6T40 is closely related to the more lightweight 6T30 and the heavier duty 6T45 and 6T50. Generation one started phasing out during the 2012 model year. The generation two pump had a slightly different pressure regulator valve, but overall the first two 6T40 generations had the same pump layout.

Seeing the Forest AND the Trees

They say that the proverbial phrase “I couldn’t see the forest for the trees” means that a person or organization cannot see the big picture because it focuses too much on the details. Related Articles – The Manifold Pipeway – 8L90 Vacuum Testing – 4L60E Harsh 1-2 Shift I have seen this phrase used after

The Manifold Pipeway

The Honda six-speed transmission has been on the bench of many specialty shops for one reason or another (figure 1). But, for those of you who have yet to lay your hands on one, mounted on the upper side of the unit is one of the largest, if not the largest solenoid and pressure switch

8L90 Vacuum Testing

Below are the diagrams for vacuum testing GM 8L90 transmissions. Note: OE valves are shown in rest position and should be tested in rest position unless otherwise indicated. Test locations are pointed to with an arrow. Springs are not shown for visual clarity. A low vacuum reading indicates wear. For specific vacuum test information, refer

4L60E Harsh 1-2 Shift

The 4L60E transmission platform has been in service from 1993-2015; that’s 22 years. It amazes me when a transmission that has been around for this long can throw a new twist on a common problem and blindside you. Let us have a look at the systems and potential problems in a 4L60E that can cause

Other Posts

How to fix GM 8L45/8L90 no-move and no-pressure conditions

By now you may have heard of, or even experienced, a GM 8L45 or 8L90 transmission with a no-move or no-pressure condition. Conditions of no movement or no pressure after repair have plagued this unit since its inception. Here’s what you can do about them. Related Articles – Ford harsh downshifts: 6R75 2-1, 10R60 7-6

Tasc-Force-December-Figure-1-Pressure-Regulator-Valve-Assembly-Correct-1400
Stop/start accumulators: What you don’t know can hurt you

It’s no secret that the auto industry is making big moves these days, but while a lot is new, one thing that never changes is that the men and women servicing vehicles need to be learning almost constantly in order to do their jobs safely and effectively. Everybody knows not to touch hot exhaust parts,

Figure-1---Stop-Start-Accumulators-1400
How to get started with OE ECU reprogramming

The conversation goes like this: I have been paying mobile programmers or remote access programmers (RAPs) far too long. I believe I can save money and time by doing this myself. What type of equipment is needed and what is the cost to get up and running? Related Articles – Shift Pointers: Reassembling GM pumps

Troubleshooting Ford 6R80, 6R140 2-3 shift quality issues

We are all too familiar by now with the numerous band numbers on Ford 6R80 and 6R140 transmissions. We know that — unless you are programming in a new calibration code — it is best to replace a solenoid with the exact same band number as what was taken out of that position on the

tasc-tip-September