Sonnax releases boost valve kits for Toyota transmissions - Transmission Digest

Sonnax releases boost valve kits for Toyota transmissions

Sonnax has released new drop-in C1 and C4 apply boost valve kits (part numbers 168740-01K and #168740-02K, respectively) for Toyota’s UA80E, UA80F, UB80E and UB80F transmissions. The sleeves in these kits are manufactured from wear-resistant billet aluminum. Sonnax says these kits can prevent wear and restore proper hydraulic control in these Toyota/Lexus transmissions.

You May Also Like

GFX announces new underdrive pressure plate

GFX has introduced a new underdrive pressure plate. According to the company, the product is designed to fit Hyundai and Kia models from 2009 and on.

GFX-newest-product-1400

GFX has introduced a new underdrive pressure plate. According to the company, the product is designed to fit Hyundai and Kia models from 2009 and on.

Sonnax highlights TH400 heavy and extreme duty input shafts 

Input shaft failure is a common problem in GM TH400 transmissions running with added horsepower. Sonnax notes that it offers heavy and extreme duty input shafts compatible with heavy duty forward drum part no. 34554-01 and Smart-Tech drum module no. 34555-01K. Related Articles – Dorman introduces transmission oil cooler bypass valve – Sonnax introduces TCC signal damper piston kit for Ford, GM

Dorman introduces transmission oil cooler bypass valve

Among new products released by Dorman is a transmission oil cooler bypass valve, designed for specific Chevrolet, GMC and Cadillac SUVs and pickup trucks. This product is intended to address issues like overheating, insufficient heat generation, or fluid leaks in transmissions, Dorman said. Made from solid aluminum billet, the valve features an additional access port

Dorman-Products-building-HQ
Sonnax introduces TCC signal damper piston kit for Ford, GM 10-speeds

Sonnax has introduced a new TCC signal damper piston kit for GM and Ford 10-speed transmissions. Sonnax says this kit can correct the operation of the converter in GM 10L80/90 (Gen. 1) and Ford 10R60/80 transmissions. Related Articles – Transtar launches Transmaxx brand of remanufactured transmission products with ETE Reman – Sonnax introduces 10L/10R LPC

PRT launches new complete strut assemblies

PRT has announced the launch of new complete strut assemblies for light vehicles, SUVs and pickup trucks in the North American aftermarket. The launches include models such as Honda Civic, Jeep Cherokee and Toyota Highlander, in addition to brand new applications such as the 2021 Subaru Forester, the 2021 Toyota Corolla, and the 2021 Honda

PRT-Strut-1400

Other Posts

Diagnosing Ford 10R60, 10R80 and 10R140 series speed sensor issues

Ford 10-speed 10R series transmissions utilize four two-wire, Hall-effect sensors — TSS, ISSA2, ISSAB and OSS — for providing speed signals to PCM or TCM. They are supplied nine volts by a PCM or TCM and assist in the control of clutch apply/release timing that is used in determining shift quality, including TCC. Related Articles

Easy TH400, 4L80-E reverse servo setup: Craft your own tool

While not as sensitive as some shifting bands, the Reverse band adjustment on a TH400 or 4L80-E transmission is critical, and failure to get it right has tripped up even the best builders. There is nothing worse than getting the transmission installed, putting it in Reverse and then not going anywhere or having no engine

Alto releases bushing kit for 10-speed transmissions

Alto has released a new 11-piece bushing kit for Ford and GM 10-speed transmissions. The kit (part no. 231625B) works for 10L80, 10L90 and 10R80 transmissions of model years 2017 and on. Related Articles – Raybestos offers new 10-speed performance GPZ Torqkits – Vote for the Top 10 Powertrain Products of 2024 – Raybestos introduces

Raybestos offers new 10-speed performance GPZ Torqkits

Raybestos announced that it is offering new Clutch Torqkits for Ford 10-speed transmissions. Related Articles – 13 BorgWarner OEM/S solenoids move to Rostra – Gray Tools releases insulated socket sets – RatioTek introduces new tuner kit for Ram trucks There are three part numbers for the D (pictured above), E, and F Clutch Torqkit, respectively.