TransGo introduces 62TE high pressure kit for vans - Transmission Digest

TransGo introduces 62TE high pressure kit for vans

TransGo recently released a high pressure tuneless reprogramming kit for 62TE transmissions, model years 2007 and on. The company says it is specifically suited for work and passenger vans like the Ram ProMaster.

According to the company, a recalibrated pressure curve in this kit delivers increased clutch and TCC holding capacity with short, clean shifts at all throttle openings. A 26% overall increase in line pressure takes this unit from 60-135 PSI to 75-169 PSI, the company shared.

According to TransGo, the kit includes:

  • Drop-in hardened steel PR valve and calibration spring
  • Drop-in torque converter limit valve system
  • Billet 2-4 accumulator, (2) springs and (3) sealing rings
  • (5) High temperature accumulator seals and expanders (for aluminum accumulator pistons only)
  • Drill jig, drill bit and precision orificed cup plug
  • Wider, heavy duty snap ring for 2-4 piston
  • Non-shrinking low/reverse piston housing gasket
  • Self-expanding Tuff underdrive seal and expander wire

You May Also Like

Schaeffler releases TorCon 6L80 torque converter

Schaeffler announced the debut of the LuK TorCon 6L80 torque converter, which the company notes is all-new and not remanufactured. The TorCon 6L80 is compatible with 2007-2020 GM trucks, vans and SUVs with a 5.3L, with a current VIO of 6,211,856, according to Schaeffler. Schaeffler claims that the product’s design leads it to last up to

Schaeffler announced the debut of the LuK TorCon 6L80 torque converter, which the company notes is all-new and not remanufactured.

The TorCon 6L80 is compatible with 2007-2020 GM trucks, vans and SUVs with a 5.3L, with a current VIO of 6,211,856, according to Schaeffler.

Schaeffler claims that the product's design leads it to last up to five times longer than rebuilt torque converters. Schaeffler also said that the LuK TorCon 6L80 requires only a straightforward match to the transmission, rather than needing to find model-specific cores.

American Powertrain adds GearStar automatic transmissions for Ford, Chevy, Mopar

American Powertrain announced that it has added GearStar automatic transmissions for Ford, Chevy, and Mopar. Transmissions include the 4L60E for SBC, BBC and early LT engines; the 4L65E for LS and late LT engines; SB and BB Mopar and Gen III engines; the 4L80E for LS engines; and late model LTs and the 4R70W for Ford small block engines.  Related Articles

PRT launches 59 new complete strut assemblies

PRT announced the launch of 59 new complete strut assemblies for the North American market. Related Articles – BendPak announces upgraded Litestix work light – Sonnax introduces TCC apply limit switch valve kits for Chrysler RFE series – Schaeffler offers new LuK clutch kits The launch includes application coverage for Nissan Frontier, Toyota Highlander and Mercedes E-Class

Raybestos adds new Toyota UA80 / UB80 converter clutch plates

Raybestos has introduced a series of Toyota UA80 and UB80 converter clutch plates. They include: Related Articles – Transtar to offer recycled engines – Sonnax introduces GM 6L80, 6L90 output planet saver kits – Alto introduces filters for GM 6L series

Sonnax introduces drop-in 4-5-6 sleeved accumulator piston kit for GM 6T series

Sonnax has introduced a drop-in 4-5-6 sleeved accumulator piston kit (part no. 124740-68K). The company says users can recover hydraulic control and renew shift feel and performance in GM 6T70, 6T75, 6T80 (Gen. 2) transmissions by installing this kit. Related Articles – PRT launches 30 new complete strut assemblies – Force Control Industries releases transmission

Other Posts

American Powertrain introduces ProTwin disc clutch for GM, Ford and Mopar

American Powertrain announced that it now offers a new ProTwin twin disc clutch kit for GM, Ford and Mopar performance applications. The kit comes with a billet steel flywheel, pressure plate, two drive discs, floater, flywheel crank bolts, pilot bearing and alignment tool. Each clutch kit comes fully balanced and features 1100 ft./lbs. of torque

Sonnax introduces Smart-Tech clutch kit for GM 4L series

Sonnax has introduced a new Smart-Tech clutch kit for optimizing clutch capacity and guarding against clutch burnup in GM 4L60, 4L60-E, 4L65-E and 4L70-E transmissions. This kit (part no. 77734-01K) includes eight .067-in. BorgWarner high-energy frictions and seven .095-in. Lindered steels recommended for use with Sonnax Smart-Tech input housings. Related Articles – Alto releases friction

Snap-on debuts new general service tool set 

Snap-on has introduced a new 33-piece tool set for general car service. The 233FSMBFR 33-Piece 3/8in. Drive General Service Set offers tools in a closed cell cross-linked foam case. Related Articles – Alto introduces aluminum oil pans for Chrysler transmissions – Sonnax introduces heavy-duty ‘A’ clutch backing plate – TransGo releases S4 regulator valve for 2018-on

Gray Tools introduces insulated hex bit socket set

Gray Tools has introduced a 16-piece insulated hex bit socket set. Made in the U.S.A., the set features both SAE and metric sizes, contained in a carrying case with a foam organizer. All pieces have dual-layer insulation, providing user protection up to 1,000 volts in a variety of electrical applications, the company said. Related Articles – Bosch