Sonnax highlights Chrysler RFE Sure Cure kits - Transmission Digest

Sonnax highlights Chrysler RFE Sure Cure kits

Sonnax highlights its Sure Cure kits for replacing worn areas in Chrysler RFE series transmissions.

Part numbers include:

  • #SC-RFE-453 fits 2018-earlier units with OE switch valve with .453-in. dia. large spool only.
  • #SC-RFE-420 fits 2018-earlier units with OE switch valve with .420-in. dia. large spool only.

These kits cover Chrysler 45RFE, 545RFE, 65RFE, 66RFE and 68RFE transmissions.

You May Also Like

Alto releases friction and steel module for ZF 6HP transmissions

Alto has introduced a new friction and steel module for ZF 6HP series transmissions. The module works with ZF 6HP19/X/A (model years 2004 and on) and ZF 6HP21/X (model years 2007 and on) for ZF, Audi, BMW and Volkswagen vehicles. Alto says that the product (part no. 143751X) features G3 frictions and Kolene steels.

Alto has introduced a new friction and steel module for ZF 6HP series transmissions. The module works with ZF 6HP19/X/A (model years 2004 and on) and ZF 6HP21/X (model years 2007 and on) for ZF, Audi, BMW and Volkswagen vehicles.

Alto says that the product (part no. 143751X) features G3 frictions and Kolene steels.

Sonnax introduces oversized low reverse/overdrive clutch regulator valve kit

Sonnax has introduced a new oversized low reverse/overdrive (4-5-6) clutch regulator valve kit (part no. 144740-43K) for Ford 6F35 transmissions, generations one, two and three. Related Articles – BendPak introduces new full-rise scissor lifts – Alto introduces aluminum oil pans for Chrysler transmissions – Sonnax introduces heavy-duty ‘A’ clutch backing plate Sonnax says the kit

BendPak introduces new full-rise scissor lifts

BendPak has introduced the new SP-7XE Series of full-rise scissor lifts. They are rated for a capacity of 7,000 lbs. and can raise most cars and light trucks nearly six feet. BendPak says these lifts are made for shops with space constraints. Related Articles – TransGo releases S4 regulator valve for 2018-on GM 8L45, 8L90 – American

Alto introduces aluminum oil pans for Chrysler transmissions

Alto has introduced new aluminum oil pans for Chrysler/Dodge A727, 46RE/RH, 47RE/RH and 48RE transmissions. There are two options: a ribbed design (pictured above) or a honeycomb design. Both come with a drain plug and 14 bolts. Related Articles – Aircat 1⁄4-in. mini die grinder released – Alto introduces Ford 10R series cartridge filter –

Alto-028354A-1400
Sonnax introduces heavy-duty ‘A’ clutch backing plate

Sonnax has introduced a new heavy duty “A” clutch backing plate (part no. 35577-45) for Chrysler 845RE and 850RE, and ZF 8HP45, 8HP50 and 8HP51 transmissions. Sonnax says that this plate can eliminate the flexing/bowing of the clutch pack that leads to comebacks in these transmissions, and recommends installing them in units that have not

Other Posts

Shift of the shaft: Diagnosing Chrysler 48RE manual shaft issues

The TorqueFlite transmission has been around since mid-to-late 1950s. There have been many changes surrounding the manual shaft and rooster comb through the years. This transmission shaft controls the position of the manual valve that directs oil for the gear ranges, but it also is used for a Reverse light control as well as Park/Neutral

Sonnax introduces splined stub and sleeve kit

Sonnax has introduced a one-piece carbon fiber splined stub and sleeve kit for overcoming driveshaft problems. Designed for 1350 series u-joints, this kit (part no. T35-28-350CFIK) bonds onto 3.5-in. I.D. carbon fiber tube. Sonnax says that it includes perfectly matched stub and sleeve components. Related Articles – Top 20 Tools and Products: The Winners – GFX announces

Top 20 Tools and Products: The Winners

Transmission Digest readers voted during the past several weeks to select this year’s top products and tools from those nominated in our December issue. This year, rather than separate contests, voting was for a combined tool and equipment contest, with 20 winners rather than 10. Winning entries appear in the following images, but are in

top20Feature-1400
GFX announces new underdrive pressure plate

GFX has introduced a new underdrive pressure plate. According to the company, the product is designed to fit Hyundai and Kia models from 2009 and on. Related Articles – Dorman introduces transmission oil cooler bypass valve – Sonnax introduces TCC signal damper piston kit for Ford, GM 10-speeds – PRT launches new complete strut assemblies

GFX-newest-product-1400