TransTec updates 6F35 Gen 1 overhaul kits

TransTec updates 6F35 Gen 1 overhaul kits

TransTec recently announced that its 6F35 Gen 1 overhaul kits have been updated to include a new Duraprene gasket (pictured above) and aluminum spacer (below). This new gasket and spacer are used in place of the silicone sealant the OEM uses.

  • TransTec Kit Numbers affected: 71018423 / 81000651
  • Applications and Year Coverage: Gen I 6F35, model years 2008-2012

You May Also Like

Sonnax releases Subaru TR580 boost valve kit

Sonnax has released a new drop-in TCC boost valve kit for Subaru TR580 transmissions. Sonnax says users can restore hydraulic integrity to the TCC circuit with tightly controlled tolerances in these transmissions by installing this kit (part no. 823740-12K). This kit includes a steel valve that combats premature wear and wear-resistant sleeves, the company says.

Sonnax-823740-12K-600

Sonnax has released a new drop-in TCC boost valve kit for Subaru TR580 transmissions. Sonnax says users can restore hydraulic integrity to the TCC circuit with tightly controlled tolerances in these transmissions by installing this kit (part no. 823740-12K). This kit includes a steel valve that combats premature wear and wear-resistant sleeves, the company says.

Alto releases TR60-SN torque converter steels

Alto has released a new line of torque converter steels for the BorgWarner/Aisin Warner TR60-SN transmission. The product covers model years 2004 and on. Related Articles – Sonnax releases GM 6L80, 6L90 low/reverse sprag rebuild kits – Freudenberg-NOK adds new line of TransTec bonded pistons – Sonnax highlights intermediate clutch backing plates for GM transmissions

Alto-185717-320-1400
Sonnax releases GM 6L80, 6L90 low/reverse sprag rebuild kits

Sonnax introduced a new low/reverse sprag rebuild kit for GM 6L80 and 6L90 transmissions. The company says users can use this kit to replace the element, retainer plate, end caps and snap ring in these transmissions without buying an entire sprag assembly. Related Articles – Sonnax highlights center support snap ring for Ford 6R series

Sonnax-104642-80SK-600
Freudenberg-NOK adds new line of TransTec bonded pistons

Freudenberg-NOK has announced a new line of TransTec bonded pistons. According to the company, Freudenberg-NOK bonded pistons are engineered and manufactured by the same machinery and same people as FN pistons, and are made in New Hampshire. Transmission models covered include the ZF 8HP45 and 8HP70, the Chrysler 62TE and the GM 6L80/90. Related Articles

TransTec-Bonded_Pistons-1400
Sonnax highlights intermediate clutch backing plates for GM transmissions

Sonnax highlights its heavy-duty intermediate clutch backing plates for GM 4L80-E, 4L85-E and TH400 transmissions. Both backing plates are compatible with OE and aftermarket cases, the company says. Related Articles – Autel introduces alignment and ADAS lifts – BendPak introduces new double-wide parking lifts – Alto adds new filter for Toyota CVTs Plates available include:

Sonnax-34144HD-01-600

Other Posts

TransTec adds new overhaul kit for Honda CVTs

Freudenberg-NOK has launched a new TransTec Honda CVT overhaul kit.  The kit number is 49477913 and it covers the following applications: Related Articles – Dorman introduces new torque converter solenoid for Subaru – ATI introduces pressure regulator valve for Powerglide valve B – Alto introduces piston kit for Ford, GM 10-speed transmissions The company says

Dorman introduces new torque converter solenoid for Subaru

Among new products released by Dorman is an OE FIX torque converter lock-up solenoid (part no. 926-408) that the company says is designed to match the fit and function of the original part on almost four million 2012-2020 Subaru vehicles. This new repair solution allows the replacement of just the failed solenoid rather than the

Dorman-Torque-Converter-Solenoid-600
ATI introduces pressure regulator valve for Powerglide valve B

ATI Performance Products has introduced a new OEM-style pressure regulator valve for Powerglide valve bodies. According to the company, this OEM-style replacement and will work with OEM mating parts with no modifications. The part no. is 203181 and the valve was made in America. Related Articles – Alto introduces new front pump cover for Chrysler

ATI-203181
Alto introduces piston kit for Ford, GM 10-speed transmissions

Alto has introduced a new three-piece molded piston kit for Ford and GM 10-speed transmissions. The kit covers Ford 10R80 and GM 10L80/90 transmissions, model years 2017 and on. The Alto part no. is 231670. Related Articles – GFX announces low-pressure drop oil cooler – TransTec introduces stator sleeve tool kit – GFX introduces filter

Alto-231670-1400