Freudenberg-NOK adds new line of TransTec bonded pistons
Freudenberg-NOK has announced a new line of TransTec bonded pistons. According to the company, Freudenberg-NOK bonded pistons are engineered and manufactured by the same machinery and same people as FN pistons, and are made in New Hampshire. Transmission models covered include the ZF 8HP45 and 8HP70, the Chrysler 62TE and the GM 6L80/90.

TransTec introduces new Ford 8F35 overhaul kits
Freudenberg-NOK has launched new TransTec overhaul kits for the Ford 8F35 transmission. The kits can be purchased either with or without pistons. TransTec says their overhaul kits include everything you need for a complete mechanical repair, including all o-rings, metal clad seals, bushings and gaskets. Models covered include the following:

TransTec adds new overhaul kit for Honda CVTs
Freudenberg-NOK has launched a new TransTec Honda CVT overhaul kit. The kit number is 49477913 and it covers the following applications: The company says this overhaul kit includes everything needed for a complete mechanical repair, including all o-rings, metal clad seals, bushings and gaskets.

TransTec adds new overhaul kits for ZF 8HP75
Freudenberg-NOK has announced the launch of new TransTec overhaul kits for the ZF 8HP75 transmission. According to the company, the TransTec overhaul kit includes everything needed for a complete mechanical repair, including all o-rings, metal clad seals, bushings and gaskets. The kit is available either with or without pistons. Vehicle applications include the following: BMW

TransTec introduces stator sleeve tool kit
TransTec has introduced a new Stator Sleeve Tool Kit, which allows users to remove and replace worn-out GM stator sleeves, allowing them to rebuild the stator support instead of purchasing an aftermarket replacement. Each kit includes a removal tool and an instruction sheet. Each kit also comes with TransTec’s new replacement sleeves, one of

TransTec extends coverage for 9T overhaul kits
TransTec has shared that its 9T50 overhaul kit (part no. 49420576) and 9T50 overhaul kit with pistons (part no. 49420637) will now cover the GM 9T65 transmission, model years 2018 and up. Applications affected include:

TransTec offers 8HP50/850RE overhaul kit
TransTec recently began offering an overhaul kit for 8HP50/850RE transmissions, for Jeep, Dodge, Ram, Chrysler and BMW models. The kit is available either with pistons or without. The company notes that the kit includes o-rings, metal clad seals, bushings and gaskets. Make/model coverage includes the following: Jeep: Dodge: Ram: Chrysler: BMW:

TransTec updates 6F35 Gen 1 overhaul kits
TransTec announced that its Ford 6F35 Gen 1 overhaul kits have been updated to include a new Duraprene gasket and aluminum spacer (pictured above). This new gasket and spacer are used in place of the silicone sealant the OEM uses.

TransTec updates E40D/4100 overhaul kits
TransTec announced that all of its Ford E40D/4100 overhaul kits (model years 1996 and up) will contain Direct and Intermediate Feed Tube Seals. The company notes that due to case and support wear, some transmissions may exhibit a fluid pressure loss in the direct and intermediate clutch feed circuit, causing premature clutch failure. According to

TransTec introduces Power Steering Gear Seal Kit for Jeep Wrangler
TransTec has introduced a new Power Steering Gear Seal Kit for Jeep Wrangler. According to TransTec, the gear seal kit includes everything needed for a complete repair, including all o-rings, sealing rings, retainers and metal clad seals. This kit covers the following vehicles: Jeep The kit is available for order now.

Powertrain industry profiles 2022
The following pages contain powertrain industry profiles, key people and product information from leading companies in the marketplace. These profiles serve as an introduction for companies participating in autumn trade shows. The companies include: Evolution Driveline, Freudenberg–NOK / TransTec, Precision International, Raybestos Powertrain, Sonnax, Superior Transmission and Transtar. Click or view the images below to

TransTec updates 6F35 Gen 1 overhaul kits
TransTec recently announced that its 6F35 Gen 1 overhaul kits have been updated to include a new Duraprene gasket (pictured above) and aluminum spacer (below). This new gasket and spacer are used in place of the silicone sealant the OEM uses. TransTec Kit Numbers affected: 71018423 / 81000651 Applications and Year Coverage: Gen I 6F35,
