Sonnax introduces new five-inch splined stub and sleeve kit - Transmission Digest

Sonnax introduces new five-inch splined stub and sleeve kit

Sonnax has introduced a new aluminum splined stub and sleeve kit designed for 1350 series u-joints. Sonnax says this kit is designed for Ford trucks, including the Super Duty, among others, and allows users to raise the torque capacity of the driveshaft. The kit is part no. T35-125-500-KIT.

You May Also Like

Premium Guard unveils line of transmission filter kits

Premium Guard, Inc. recently unveiled Premium Guard Select, a new line of transmission filter kits. “The new OEM-style transmission filter kits offer superior quality and reliability with unique features that enhance the installer experience and deliver peace of mind,” the company said. The new Premium Guard Select transmission filter kits are equipped with an OE-style reusable gasket,

Premium-Guard-Transmission-Filter-kits

Premium Guard, Inc. recently unveiled Premium Guard Select, a new line of transmission filter kits. “The new OEM-style transmission filter kits offer superior quality and reliability with unique features that enhance the installer experience and deliver peace of mind,” the company said.

The new Premium Guard Select transmission filter kits are equipped with an OE-style reusable gasket, which is made with high-grade steel and coated with high-quality NBR rubber, Premium Guard said. The new series is packaged in a flat sturdy cardboard backing to lower the risk of post-installation leaks.

Sonnax introduces splined stub and sleeve kit

Sonnax has introduced a one-piece carbon fiber splined stub and sleeve kit for overcoming driveshaft problems. Designed for 1350 series u-joints, this kit (part no. T35-28-350CFIK) bonds onto 3.5-in. I.D. carbon fiber tube. Sonnax says that it includes perfectly matched stub and sleeve components. Related Articles – GFX announces new underdrive pressure plate – Sonnax highlights TH400 heavy

GFX announces new underdrive pressure plate

GFX has introduced a new underdrive pressure plate. According to the company, the product is designed to fit Hyundai and Kia models from 2009 and on. Related Articles – Sonnax introduces TCC signal damper piston kit for Ford, GM 10-speeds – PRT launches new complete strut assemblies – TransTec releases 6L80/90 Case Saver

GFX-newest-product-1400
Sonnax highlights TH400 heavy and extreme duty input shafts 

Input shaft failure is a common problem in GM TH400 transmissions running with added horsepower. Sonnax notes that it offers heavy and extreme duty input shafts compatible with heavy duty forward drum part no. 34554-01 and Smart-Tech drum module no. 34555-01K. Related Articles – PRT Heavy Duty to exhibit at HDAW – TransTec launches 8F24 overhaul kit – Transtar launches Transmaxx brand

Dorman introduces transmission oil cooler bypass valve

Among new products released by Dorman is a transmission oil cooler bypass valve, designed for specific Chevrolet, GMC and Cadillac SUVs and pickup trucks. This product is intended to address issues like overheating, insufficient heat generation, or fluid leaks in transmissions, Dorman said. Made from solid aluminum billet, the valve features an additional access port

Dorman-Products-building-HQ

Other Posts

Diagnosing Ford 10R60, 10R80 and 10R140 series speed sensor issues

Ford 10-speed 10R series transmissions utilize four two-wire, Hall-effect sensors — TSS, ISSA2, ISSAB and OSS — for providing speed signals to PCM or TCM. They are supplied nine volts by a PCM or TCM and assist in the control of clutch apply/release timing that is used in determining shift quality, including TCC. Related Articles

Easy TH400, 4L80-E reverse servo setup: Craft your own tool

While not as sensitive as some shifting bands, the Reverse band adjustment on a TH400 or 4L80-E transmission is critical, and failure to get it right has tripped up even the best builders. There is nothing worse than getting the transmission installed, putting it in Reverse and then not going anywhere or having no engine

Sonnax introduces new piston for ZF, Ford six-speed transmissions

Sonnax highlights its new high-strength billet aluminum piston (part no. 95984-01), which is designed to provide additional strength in ZF 6HP26 and Ford 6R60/75/80 transmissions. According to Sonnax, die-cast ZF 6HP26 and Ford 6R60/75/80 pistons commonly crack at the outer diameter of the apply area due to manufacturing defects and/or high stress areas, which is

Sonnax-95984-01-1400
Snap-on announces upgrades in diagnostic software release

With its latest diagnostic software release, Snap-on said it has added more location images and larger connector diagrams to its Fast-Track Guided Component Test feature to “give professional automotive technicians increased confidence and certainty in their diagnosis.” Related Articles – BendPak to showcase eight-armed lift concept at NADA Expo; fall release planned – Valvoline launches

Snap-on-Announces-Upgrades-in-Latest-Diagnostic-Software-Release
Skip to content