Sonnax releases splined stub and sleeve kits for performance vehicles - Transmission Digest

Sonnax releases splined stub and sleeve kits for performance vehicles

Sonnax highlights its new aluminum splined stub and sleeve kit, which the company says can reliably drive power from the engine and transmission to the differential in modern muscle cars and custom street rod/hot rod vehicles. These kits make it easy to build, balance and service a rugged performance driveshaft for non-slip-yoke applications, since the slip is built into the kit, Sonnax notes.

Part numbers for 3.5-in. and 4-in. kits for modern muscle cars, custom street/hot rods are:

  • #T33-125-350-KIT (pictured above)
  • #T35-125-350-KIT
  • #T35-28-350CFK
  • #T35-125-400-KIT
  • #T48-28-350CFK

Part numbers for the 5-in. kit for heavy-duty work/sport vehicles:

  • #T48-125-500-KIT

You May Also Like

Snap-on debuts new general service tool set 

Snap-on has introduced a new 33-piece tool set for general car service. The 233FSMBFR 33-Piece 3/8in. Drive General Service Set offers tools in a closed cell cross-linked foam case. The set includes the following:

Snap-on has introduced a new 33-piece tool set for general car service. The 233FSMBFR 33-Piece 3/8in. Drive General Service Set offers tools in a closed cell cross-linked foam case.

The set includes the following:

3/8-in. drive dual 80 technology soft grip standard handle locking flex-head ratchet;

Gray Tools introduces insulated hex bit socket set

Gray Tools has introduced a 16-piece insulated hex bit socket set. Made in the U.S.A., the set features both SAE and metric sizes, contained in a carrying case with a foam organizer. All pieces have dual-layer insulation, providing user protection up to 1,000 volts in a variety of electrical applications, the company said. Related Articles – Can

Alto releases friction and steel module for ZF 6HP transmissions

Alto has introduced a new friction and steel module for ZF 6HP series transmissions. The module works with ZF 6HP19/X/A (model years 2004 and on) and ZF 6HP21/X (model years 2007 and on) for ZF, Audi, BMW and Volkswagen vehicles. Related Articles – BendPak introduces new full-rise scissor lifts – Alto introduces aluminum oil pans

Sonnax introduces oversized low reverse/overdrive clutch regulator valve kit

Sonnax has introduced a new oversized low reverse/overdrive (4-5-6) clutch regulator valve kit (part no. 144740-43K) for Ford 6F35 transmissions, generations one, two and three. Related Articles – TransGo releases S4 regulator valve for 2018-on GM 8L45, 8L90 – American Powertrain introduces new transmission install tool and seal protector – Mayhew introduces 14-piece micro hand

BendPak introduces new full-rise scissor lifts

BendPak has introduced the new SP-7XE Series of full-rise scissor lifts. They are rated for a capacity of 7,000 lbs. and can raise most cars and light trucks nearly six feet. BendPak says these lifts are made for shops with space constraints. Related Articles – Aircat 1⁄4-in. mini die grinder released – Sonnax highlights Chrysler RFE Sure Cure kits

Other Posts

Shift of the shaft: Diagnosing Chrysler 48RE manual shaft issues

The TorqueFlite transmission has been around since mid-to-late 1950s. There have been many changes surrounding the manual shaft and rooster comb through the years. This transmission shaft controls the position of the manual valve that directs oil for the gear ranges, but it also is used for a Reverse light control as well as Park/Neutral

TransGo highlights 68RFE valve body reprogramming kit

TransGo highlights its new tuneless high-pressure performance valve body reprogramming kit for the Chrysler 68RFE automatic transmission. It is designed for Ram trucks with this transmission, model years 2019 and on. The company highlights the fact that users do not have to remove the transmission to use the kit. Related Articles – Sonnax introduces three-bolt adapter

Sonnax introduces three-bolt adapter flange yoke kit

Sonnax has introduced a new three-bolt adapter flange yoke kit (part no. T35-BMWF-01K) for BMW and Toyota GR Supra vehicles with 105mm bolt circle dia. companion flange. Sonnax says that this kit is aimed at replacing weak giubo and two-piece driveshafts with a one-piece, U-joint style driveline in these vehicles. The kit includes a spacer for .552-in. pilots. Related

American Powertrain offers Camaro Tremec GM Magnum XL six-speed transmission conversion kit

American Powertrain now offers a Tremec GM Magnum XL six-speed transmission conversion kit for any 2010-2015 fifth-generation Camaro (SS) equipped with a V8 engine. This kit can be purchased with a choice of two gear sets as a replacement for the TR-6060, and is rated at over 700 lb./ft. torque with close to 8,000 RPM shift

APT_5thGenCamaroKit-1400