Powertrain industry directory and buyer's guide 2023

Powertrain industry directory and buyer’s guide 2023

This is the latest in TD’s annual series of directories for the powertrain industry. Companies that supply products to the powertrain aftermarket are listed in alphabetical order. Because data changes frequently, only organizations that have updated information with Transmission Digest in the recent past are included.

Every precaution has been taken in the preparation of these listings; however, the publisher assumes no liability for errors or omissions. Peruse the Buyer’s Guide in the window below. The first section of pages shows company listings alphabetically; the second section, starting on page 14, has them by product category.

You can also read the results of TD’s State of the Industry here.

You May Also Like

BendPak founder Don Henthorn passes away

Don Henthorn, owner and founder of BendPak Inc., peacefully passed away at home Thursday, March 28, at the age of 85. Under his leadership, BendPak has grown from a small machine shop to one of the world’s leading manufacturers of car lifts and automotive service equipment. Management and operations of the privately owned company are unchanged. Henthorn

Don-Henthorn-BendPak_Passing-1400

Don Henthorn, owner and founder of BendPak Inc., peacefully passed away at home Thursday, March 28, at the age of 85. Under his leadership, BendPak has grown from a small machine shop to one of the world’s leading manufacturers of car lifts and automotive service equipment.

Management and operations of the privately owned company are unchanged.

Shift Pointers: A Chrysler 300 no-shift complaint

The case study has to do with a 2009 Chrysler 300 C 5.7L Nag1 RWD with 71,923 miles on it (see Figure 1, above). Related Articles – A guide to common GM, Ford and Nissan programming issues – Shift of the shaft: Diagnosing Chrysler 48RE manual shaft issues – Sometimes, a diagnostic code is all

A guide to common GM, Ford and Nissan programming issues

One of the most common complaints I hear from shops when trying to install a new GM TCM is, “The module will not communicate.” While that might be partially true, by design they won’t communicate until they are programmed. If programming fails, there will be an “E” code set which will help you get to

Shift of the shaft: Diagnosing Chrysler 48RE manual shaft issues

The TorqueFlite transmission has been around since mid-to-late 1950s. There have been many changes surrounding the manual shaft and rooster comb through the years. This transmission shaft controls the position of the manual valve that directs oil for the gear ranges, but it also is used for a Reverse light control as well as Park/Neutral

Sometimes, a diagnostic code is all you need

With ATSG having the opportunity to help shops solve problems, sometimes we get faced with some real doozies. A shop will call and give us a laundry list of DTCs, leaving us to think someone must have a bulkhead connector unplugged. We then go through the arduous task of deciding which codes prompted other codes

Other Posts

Shop Boss adds Venmo, PayPal options

Shop Boss has added fully integrated PayPal and Venmo payment capabilities to its shop management software. The new feature of Boss Pay, Shop Boss’ all-in-one payments platform, is exclusively for text-to-pay customers, the company said.  Related Articles – DOJ, FTC signal support for MEMA Aftermarket suppliers’ petition – NexaMotion Group opens new Arch Auto Parts store

DOJ, FTC signal support for MEMA Aftermarket suppliers’ petition

The U.S. Department of Justice (DOJ) and the Federal Trade Commission (FTC) recently submitted support to the U.S. Copyright Office for MEMA Aftermarket Suppliers’ petition for a new exemption to the Digital Millennium Copyright Act (DMCA)’s anti-circumvention provisions. These provisions prohibit bypassing copyright protection systems. MEMA’s proposed exemption would allow consumers to view their vehicle’s

DOJ-FTC-Support-MEMA-Aftermarket-Suppliers-Petition
NexaMotion Group opens new Arch Auto Parts store

NexaMotion Group (NMG) announced the opening a new Arch Auto Parts store in Plainview, New York. The new store, opened on March 16 and located at 125 Newtown Road, is the company’s fourth location in Nassau County. Related Articles – The Alliance promotes JC Washbish to President – Transtar Holding Co. acquires Arch Auto Parts –

NexaMotion-Group-Opens-New-Arch-Auto-Parts-Store
NexaMotion Group announces expansions for Transtar products, C&M Auto Parts locations 

NexaMotion Group announced expansions for two of its businesses. Transtar Industries is adding general repair product lines in four new markets: Cleveland and Mentor, OH; Pittsburgh, PA; and its newest location in Dallas, TX. In addition, the company announced that C&M Auto Parts has opened two new locations in the New Jersey market. C&M Auto Parts

Transtar