Serviceability Report: Chevrolet Malibu - Transmission Digest

Serviceability Report: Chevrolet Malibu

The name Malibu brings a lot of us older techs back to a time in the ’60s that was more “car” based and less about the world impact of so many vehicles. My dad drove a 1967 Malibu 307 two-door hardtop, blue with a white vinyl roof, that I borrowed for my first date. Oh, the memories; simpler times for sure.

Serviceability Report: Chevrolet Malibu

Tech to Tech

Subject: Serviceability Report
Vehicle Application: 2008 Chevrolet Malibu
Essential Reading: Rebuilder, Diagnostician, R & R
Author: Craig Van Batenburg

Is GM serious about better cars and hybrid technology?

Tech to Tech

  • Subject: Serviceability Report
  • Vehicle Application: 2008 Chevrolet Malibu
  • Essential Reading: Rebuilder, Diagnostician, R & R
  • Author: Craig Van Batenburg

Is GM serious about better cars and hybrid technology?

I visit a few auto shows each year for press-day events, so I traveled to Boston recently to see the latest offerings. Many noteworthy cars were on display, so I opened hoods, sat behind the wheels and looked underneath to see what was new. A shiny Malibu hybrid caught my eye, and I spent some time poring over this car. I was impressed with the package.

The name Malibu brings a lot of us older techs back to a time in the ’60s that was more “car” based and less about the world impact of so many vehicles. My dad drove a 1967 Malibu 307 two-door hardtop, blue with a white vinyl roof, that I borrowed for my first date. Oh, the memories; simpler times for sure.

We will focus on the 2008 Chevy Malibu 2.4 four-door sedan (not the hybrid model). As I have said many times, I will not let my bias change the real story. I grew up in northern Utah as a son of a mechanic. My dad loved Fords, but a Chevy was allowed from time to time. There were only American cars in my life. Times have changed. When I was born, General Motors Corp. had more than 50% of the market share. Now GM holds less than 25%. Will they get that market share back? What has the largest car company in the world done to its popular sedan? Is the 2008 Malibu getting better for techs to work on?

The Chevrolet Malibu was completely reinvented for 2008. With dramatic changes in style, refinement and performance, this midsize family sedan is now much more than a status quo American automobile. Its huge improvements now allow it to compete in a segment full of heavyweights, most of which are Asian imports. And to move in a greener direction, Chevy now adds a hybrid version of the Malibu to its model line.

A note about the hybrid version: It is powered by the GM hybrid propulsion electric system combined with the Ecotec 2.4-liter DOHC four-cylinder hybrid engine with variable valve timing (VVT) and a four-speed automatic hybrid transmission. It has a 36-volt nickel metal hydride (NiMH) battery pack in the rear powering a 36-volt electric motor/generator; the Malibu hybrid produces a respectable 164 horsepower and 159 pound-feet of torque. This is the same mild-hybrid belt alternator starter (BAS) system found in the Saturn hybrids Vue and Aura. Fuel economy rates at an efficient 24 city/32 highway, but that is only two miles per gallon better than the gas-powered four-cylinder Malibu. Perhaps this hybrid engine is simply getting people ready for the 2-mode, a more-advanced hybrid system on its way.

On the road, this BAS hybrid moves along just fine. It has plenty of power for high-speed driving, and handling is responsive. Ride quality is much better than before, and that makes the Malibu hybrid a great commuter car.

One look under the hood of the 2008 Malibu shows that little has changed over the years, and indeed little has. GM’s 2.4 has been getting better over the years. The Ecotec, as it is called, has been around more than a decade. It is not really exciting but it is good. The techs who work on these all day long just go about their work.

Service is really easy on the 2008. GM gives you a simple cover to remove, and underneath is a 12-volt battery with top posts and a trick cable latching system. No more side terminals. After someone had overtightened the cable bolts on the old battery, a simple job got out of control. Not anymore. So do we praise GM for this new battery or complain that it took too long to fix? Your call.

Relays and fuses are housed in a box next to the battery. So is the powertrain control module (PCM). The coil-on-plug ignition system is in the open after you remove the big black plastic engine cover. Opening the hood is not scary at all, as the ease of service might just be the best I have ever reported on.

The interior is not typical for GM. I found it exciting, beautiful and well built. The outward appearance is much better. The car rides much better than before. But more than anything else, I think it is the timing of this new product. It is a great car coming at a time when I believe we need to preserve every job in America and look hard at global warming and the cost of fuel. At 30 mpg highway this Chevy is double what a lot of GM customers get right now. And at $23,000, it is affordable.

Let’s compare a ’99 Malibu 2.4 with a new 2008 Malibu 2.4 (non-hybrid). In 1999, the 2.4 motor was trouble. Head gaskets and water-pump issues were a technician’s nightmare. Timing-chain noise after the timing-chain or water-pump replacement was common, ignition-coil-housing crossfire within the coil housing itself caused a misfire on cylinders 1 and 3, and the lock-cylinder housing and the rotating lock cylinder were often defective, affecting the fuel-enable circuit in the computer, causing a no-start and trouble code P1632. The list goes on.

As the car aged it just got worse. Customers lost confidence, and making money doing preventive maintenance was next to impossible. In model year 2000 the 2.4 was dropped and poor-mileage V-6 engines were used until 2004, when the 2.4 was brought back. During this five-year absence, GM lost a lot of ground to good four-cylinder sedans. While the Malibu suffered with only a V-6, five hybrids were introduced by the competition. Timing is everything. When the 2.4 engine came back it went into a very boring body, in my opinion, but GM got the 2008 Malibu right. Is it too late?

Overall, this entire car is a good design. It is the easiest car to work on in the areas I list above of any car, truck, SUV and minivan I have reviewed to date. GM deserves a pat on the back from all the techs out there. How will it age? I sure hope the answer will be positive.

Craig Van Batenburg, AAM, is the owner of the Automotive Career Development Center (www.autocareers.org) and delivers management and technical seminars nationwide. He formerly owned Van Batenburg’s Garage Inc. in Worcester, Mass., for more than 25 years. Van Batenburg is ASE master and L1 certified, with advanced skills in hybrid drive systems. You can reach him by e-mail at [email protected].

This copyrighted article is reprinted with the permission of AutoInc., the official publication of the Automotive Service Association (ASA). To learn more about ASA and its commitment to independent automotive-service and repair professionals, visit www.ASAshop.org or call 800-272-7467.

You May Also Like

Don’t fear customer complaints about CVTs

Continuously Variable Transmissions, or CVTs, are more common than you think. Audi, Subaru, Nissan, Ford, GM and many other automakers use CVT transmissions in cars and SUVs. There is no way to avoid them. Chances are there is one in your shop right now. What does CVT mean for technicians? On the maintenance side, a

CVT-Transmission-2

Continuously Variable Transmissions, or CVTs, are more common than you think. Audi, Subaru, Nissan, Ford, GM and many other automakers use CVT transmissions in cars and SUVs. There is no way to avoid them. Chances are there is one in your shop right now.

What does CVT mean for technicians? On the maintenance side, a CVT requires more or the same frequency of fluid and filter changes as a conventional automatic transmission, and many of the basic procedures are the same. On the diagnostic side, a CVT is less complicated internally than a six- or nine-speed transmission. Diagnostics with a scan tool are about the same. On the service side, while you may never pull a variator or belt out of a CVT, you can service components like sensors, pumps and valve bodies. The point here is not to fear a customer complaint about a CVT. 

Shift Pointers: A Chrysler 300 no-shift complaint

The case study has to do with a 2009 Chrysler 300 C 5.7L Nag1 RWD with 71,923 miles on it (see Figure 1, above). Related Articles – 2024 State of the Powertrain Industry – Powertrain industry directory and buyer’s guide 2024 – A guide to common GM, Ford and Nissan programming issues It is based

A guide to common GM, Ford and Nissan programming issues

One of the most common complaints I hear from shops when trying to install a new GM TCM is, “The module will not communicate.” While that might be partially true, by design they won’t communicate until they are programmed. If programming fails, there will be an “E” code set which will help you get to

Shift of the shaft: Diagnosing Chrysler 48RE manual shaft issues

The TorqueFlite transmission has been around since mid-to-late 1950s. There have been many changes surrounding the manual shaft and rooster comb through the years. This transmission shaft controls the position of the manual valve that directs oil for the gear ranges, but it also is used for a Reverse light control as well as Park/Neutral

Sometimes, a diagnostic code is all you need

With ATSG having the opportunity to help shops solve problems, sometimes we get faced with some real doozies. A shop will call and give us a laundry list of DTCs, leaving us to think someone must have a bulkhead connector unplugged. We then go through the arduous task of deciding which codes prompted other codes

Other Posts

Easy TH400, 4L80-E reverse servo setup: Craft your own tool

While not as sensitive as some shifting bands, the Reverse band adjustment on a TH400 or 4L80-E transmission is critical, and failure to get it right has tripped up even the best builders. There is nothing worse than getting the transmission installed, putting it in Reverse and then not going anywhere or having no engine

Spotting different 68RFE designs through the years to avoid issues

The Chrysler 68RFE has had several changes through the years. Its four-speed predecessor began with a noisy solenoid pack identified by a black colored pass-through case connector (seen in Figure 1).  Related Articles – Outgrowing the walls: The story of EVT Transmission Parts – Valve body and component suppliers: A comprehensive list – Shift Pointers:

Shift Pointers: Failures caused by incorrect tire sizes

For years ATSG has produced a wide range of issues related to improper tire sizes on vehicles. Even under-inflated tires have been known to cause issues. Problems such as premature failure with an active 4WD transfer case will occur with incorrect tire sizes. Related Articles – Understanding lube flow control valves in Toyota/Lexus UA/UB80 transmissions

Shift-Pointers-Jan-Figure-1-1400
Understanding lube flow control valves in Toyota/Lexus UA/UB80 transmissions

The Toyota/Lexus UA80 and UB80 transmissions first came out in 2017 in Highlanders and Siennas. The UA80 is used in V6 applications, and the UB80 is paired with four-cylinder versions. They have been called Toyota New Global Architecture type transmissions, and alternately referred to as the “Direct Shift 8AT” eight-speed automatic transmission. This transmission was

Tasc-Tip-December-Figure-1---LFC-Valve-OE-Partial-Circuit-Diagram-1400