Video: Instant shudder fix - Transmission Digest

Video: Instant shudder fix

This sponsored video shows users how to apply Instant Shudder Fixx by Lubegard.

It can be difficult to determine if your shutter is a fluid-related issue or a costly mechanical problem. This video is sponsored by Lubegard.

Here is the text of the video:

Welcome to how to apply Instant Shudder Fixx by Lubegard, the number one shudder solution used and trusted by professionals. Lubegard’s Instant Shudder Fixx is a concentrated friction modifier formulated specifically for eliminating torque converter or TCC shudder in automatic transmissions.

As automatic transmissions age, the lockup torque converter’s ability to transfer torque smoothly can decline, and additive packages in automatic transmission fluids can deplete, resulting in torque converter clutch shudder. TCC shudder can also occur in brand-new automatic transmission fluids.

This is due to a frictional deficiency of the fluid and can be easily corrected with the use of a friction modifier such as Instant Shudder Fixx. It can be difficult to determine if your shutter is a fluid-related issue or a costly mechanical problem. Instant Shudder Fixx is a low-cost diagnostic tool that can quickly and easily determine if your shudder is a fluid-related problem or if your torque converter may be failing.

This solution could potentially save you thousands of dollars on an expensive rebuild. To add Instant Shudder Fixx, first locate the transmission dipstick tube or the transmission fluid fill port. Use a pair of scissors or sniffs to cut open the tube. Then use a funnel to help pour the Instant Shudder Fixx into the transmission. The vehicle can be warm or cold. It’s that simple. It’s that instant. You’re all set.

Instant Shudder Fixx will work in all makes and models except for older Ford vehicles manufactured before the 1980s that require type F transmission fluid. Instant Shudder Fixx should also not be used in continuously variable transmissions (CVTs), or dual clutch transmissions (DCTs). Be sure to check your owner’s manual for your transmission type.

One two ounce tube of Instant Shudder Fixx will treat a 10 quart system or under. A maximum of two tubes can be used safely in a vehicle with a 10 quart system or under.

Instant Shudder Fixx usually works instantly, as the name implies, but can take up to 20 miles of driving in severe cases. If the shudder problem goes away, your problem was most likely fluid related. If you don’t see any improvement after using Instant Shudder Fixx, then you may have a mechanical problem with the torque converter.

If you had success with Instant Shudder Fixx, then we recommend adding a bottle of our synthetic ATF protectant, Lubegard Red, or our platinum ATF protectant. Both products are compatible with Instant Shudder Fixx and provide long-term shudder relief as well as wear reduction, seal protection, improved shifting, and both products restore additive depletion from new and used automatic transmission fluid.

You May Also Like

Sponsored video: How to apply Lubegard CVT Recharge

In this sponsored video, find a walkthrough on how to apply Lubegard’s CVT Recharge. The text of the video is below: CVT Recharge was formulated and designed specifically to restore performance to additive-depleted, continuously variable transmission (CVT) fluid when problems occur before normal fluid change intervals. Let’s take a look. Lubegard’s CVT Recharge is a

Lubegard-CVT-Recharge

In this sponsored video, find a walkthrough on how to apply Lubegard's CVT Recharge. The text of the video is below:

CVT Recharge was formulated and designed specifically to restore performance to additive-depleted, continuously variable transmission (CVT) fluid when problems occur before normal fluid change intervals. Let’s take a look.

Sponsored video: Lubegard engine oil protectant for turbocharged engines (LSPI)

In this sponsored video, Lubegard highlights the features and benefits of its engine oil protectant for turbocharged engines with LSPI (low-speed pre-ignition), one of the most common problems found in today’s turbocharged gasoline engines, and one you might experience in your shop.

Lubegard-video-preview
Video: Lubegard Limited Slip Supplement overview

This sponsored video highlights the Lubegard Limited Slip Supplement, a concentrated friction modifier formulated specifically for eliminating noise, and chatter, and clutch-type limited slip differentials.

Video: Rust and corrosion preventive oil

This sponsored video highlights Rustgard, a rest and corrosion prevention oil from Lubegard.

Sponsored video: Aluminum protectant

This video is sponsored by Lubegard. The text of the video is below. Did you know that automatic transmission fluid and other hydraulic fluids do not protect aluminum from wear? This means that aluminum that is in contact with steel or other aluminum parts such as valve bodies, servo boards and pistons is not protected

Other Posts

Valvoline launches Restore & Protect motor oil line

Valvoline Global announced the global launch of its new full synthetic motor oil, Restore & Protect. Vaolvoline says the new oil removes up to 100% of engine-killing deposits with continuous use. Related Articles – Snap-on debuts new general service tool set  – Gray Tools introduces insulated hex bit socket set – Mayhew introduces 14-piece micro hand tool set Restore

Valvoline-2-1400
GFX announces low-pressure drop oil cooler

GFX has introduced a new low-pressure drop oil cooler for all transmission makes, including heavy-duty application models. According to the company, the product is designed to replace all years.  Related Articles – Transtar to offer recycled engines – Sonnax introduces GM 6L80, 6L90 output planet saver kits – Alto introduces filters for GM 6L series

GFX-Oil-Cooler-600
ILI introduces Lubegard engine oil protectant for turbocharged engines

International Lubricants, Inc. (ILI), makers of Lubegard automotive branded lubricants, announced the introduction of Lubegard Engine Oil Protectant for Turbocharged Engines (LSPI), available exclusively at AutoZone as of this February. Related Articles – PRT launches 30 new complete strut assemblies – Force Control Industries releases transmission fluid for oil shear clutch and brake applications  –

Lubegard-1400
Sponsored video: Kooler Kleen product overview

This video is sponsored by Lubegard. The text of the video is below. Welcome to the Lubegard Kooler Kleen Transmission Kooler Line Flush with two-in-one fitting, part number 19001-UNV product overview. OEMs state that the transmission oil coolers must be flushed whenever transmissions are replaced, or contaminants, such as metal particles and clutch material, may

lubegard kooler kleen