TransTec updates 6F35 Gen 1 overhaul kits - Transmission Digest

TransTec updates 6F35 Gen 1 overhaul kits

TransTec announced that its Ford 6F35 Gen 1 overhaul kits have been updated to include a new Duraprene gasket and aluminum spacer (pictured above). This new gasket and spacer are used in place of the silicone sealant the OEM uses.

  • TransTec Kit Numbers affected: 71018423 / 81000651
  • Applications and Year Coverage: Gen 1 6F35, model years 2008-2012

You May Also Like

Sonnax introduces low/reverse sprag rebuild kit for Chrysler 68RFE

Sonnax highlights its low/reverse sprag rebuild kit for Chrysler 68RFE transmissions. The company says this kit (part no. 72642SK) allows replacement of the end caps, low/reverse sprag elements and retainer plates without needing to buy a full sprag assembly.

Sonnax-72642SK

Sonnax highlights its low/reverse sprag rebuild kit for Chrysler 68RFE transmissions. The company says this kit (part no. 72642SK) allows replacement of the end caps, low/reverse sprag elements and retainer plates without needing to buy a full sprag assembly.

Alto introduces new extension housing seal for Ford 5R55W/S, AODE, 4R70W

Alto has introduced a new extension housing seal for a few Ford transmission applications. The models covered by the metal clad seal include: 5R55W/S model years 2002-2010; AODE model years 1992-1995; and 4R70W trucks model years 1993 and on.  Related Articles – GFX announces 47-teeth differential gear for Toyota transmissions – Alto releases Ford 5R55W/S wire harness

Alto-Ford-Extension-Housing-Seal-1400
GFX announces 47-teeth differential gear for Toyota transmissions

GFX has introduced a new 47-teeth differential gear for Toyota transmissions, including the U660E. According to the company, the product is designed to replace years 2007 and on. Related Articles – Rostra offers variable bleed solenoids for second generation Ford 6F35 – Georend highlights billet aluminum stator for torque converters – Dana announces new line of electric transmissions

GFX-differential-gear-Toyota-600
Alto releases Ford 5R55W/S wire harness repair kit

Alto has introduced a new aftermarket wire hardness repair kit with wire connectors for Ford 5R55W/S transmissions, model years 2002 to 2010. The Alto part no. is 137505NA. Related Articles – GFX introduces new filter for Dodge, Isuzu, Hino, Mitsubishi Fuso vehicles – Alto introduces new molded piston for VW, Toyota applications – Alto adds

Alto-Ford-Wire-Harness-1400
GFX announces new pump for Ford 6F35E

GFX has announced a new pump for the Ford 6F35E transmissions. The pump is for generation 2 models and has a snap ring on seal. According to the company, this pump is designed to replace OEM part no. RF9L8P-7A105CB for years 2013 and on. Related Articles – American Powertrain introduces Chevy/GMC 4×4 Tremec 4050 transmission kit

GFX-Ford-pump-600

Other Posts

Ford 6F35 harsh forward re-engagement after stop/start

The complaint A 2014 to 2016 Ford Escape equipped with the 6F35 transmission built on or before Feb. 26, 2016, may have a complaint of a harsh forward or reverse engagement after an active stop/start event. The Malfunction Indicator Lamp may be illuminated and diagnostic trouble code P0C27 “Auxiliary Transmission Fluid Pump Motor Current Low”

Tech-Talk-May-Figure-9
How the Ford engine stop/start system affects transmissions

2018 and later Ford Escape vehicles equipped with a 1.5 L Eco-Boost, 2.0-liter turbocharged engine or the 2L VCTi engines, and the 6F35 transmission, have an engine stop/start system. The stop/start feature can be disabled by the driver and will remain disabled after each key cycle until reactivated by the driver. Some Ford Fusion and

Tech-Talk-May-Figure-1
Alto adds new torque converter sealing ring set

Alto has introduced a new 25-piece kit of torque converter scarf cut teflon sealing rings for a variety of AW, Volkswagen, Audi, Skoda and Toyota transmissions. Related Articles – Sonnax introduces S4 clutch control valve kit – Alto introduces new kits for 10-speed Ford, Allison transmissions – Raybestos Powertrain introduces new A8LR1 friction and steel

Alto-Torque-Converter-Sealing-Rings-1400
Sonnax introduces S4 clutch control valve kit

Sonnax has introduced a new drop-in S4 clutch control valve kit for GM 8L45 and 8L90 transmissions. Sonnax says users can replace worn parts with this kit (part no. 154740-24K) to restore proper hydraulic control and renew clutch apply fluid pressure performance. Related Articles – Sonnax introduces remanufactured TEHCMs for 6L80/90 – Alto introduces bushing