BendPak introduces Litestix portable LED work light - Transmission Digest

BendPak introduces Litestix portable LED work light

BendPak has introduced Litestix, a portable LED work light powered by a rechargeable lithium battery. The company says this product was designed to allow technicians versatility with where they place work lights without cords getting in the way.

According to the company, Litestix uses 36 LED bulbs to provide 1,200 lumens of bright light. With high and low brightness settings, Litestix can provide up to six hours of continuous use between charges, and features an impact-resistant polycarbonate housing.

BendPak says that Litestix uses dual 90-degree swiveling handles equipped with magnetic ends to mount the light tube on any flat or off-angle metallic surface, allowing the light to sit on a vehicle. The lamp’s steel telescoping cradle frame can extend from 49.5” to 79.75” in length and can secure to the underside of a vehicle hood, for example, with the help of grabbing hooks attached at both ends of the frame. When used without the cradle frame, Litestix can be hung using recessed hooks inside the handles that twist out as needed.

You May Also Like

Sonnax introduces GM 6L80, 6L90 output planet saver kits

Sonnax has introduced new output planet saver kits for GM 6L80 and 6L90 transmissions. The company says these kits can repair and prevent common concerns and save the planetary assembly when installed. The kits (part no. 104584-80K for 6L80 and 104584-90K for 6L90) include upgraded pinion pins to supply continuous lube to the small gears.

Sonnax has introduced new output planet saver kits for GM 6L80 and 6L90 transmissions. The company says these kits can repair and prevent common concerns and save the planetary assembly when installed.

The kits (part no. 104584-80K for 6L80 and 104584-90K for 6L90) include upgraded pinion pins to supply continuous lube to the small gears.

Alto introduces filters for GM 6L series

Alto has introduced a series of filters for GM 6L series transmissions. They include: Related Articles – PRT launches 30 new complete strut assemblies – Force Control Industries releases transmission fluid for oil shear clutch and brake applications  – TransGo introduces 62TE high pressure kit for vans

PRT launches 30 new complete strut assemblies

PRT, an ADD Group brand, announced the launch of 30 new complete strut assemblies for light vehicles, SUVs and pickup trucks, which it said represent more than 10 million vehicles in new coverage. Related Articles – OTC releases TJHP15 transmission jack  – American Powertrain introduces ProTwin disc clutch for GM, Ford and Mopar – Sonnax

Force Control Industries releases transmission fluid for oil shear clutch and brake applications 

Force Control Industries introduced a new private label transmission fluid, which the company says is engineered specifically for oil shear applications. This type F automatic transmission fluid (ATF) is formulated using premium base oils, which the company says it used for thermal stability, viscosity characteristics, and their ability to withstand harsh operating environments. It is

TransGo introduces 62TE high pressure kit for vans

TransGo recently released a high pressure tuneless reprogramming kit for 62TE transmissions, model years 2007 and on. The company says it is specifically suited for work and passenger vans like the Ram ProMaster. Related Articles – Sonnax introduces oversized low reverse/overdrive clutch regulator valve kit – BendPak introduces new full-rise scissor lifts – Alto introduces

Other Posts

Can you jump-start an EV?

Here’s a real-world scenario: A customer brings their EV into your shop for service, and it’s been there for quite a while because the parts are on backorder. After a few weeks, you get in the vehicle to move it out of your way, and the ignition won’t turn on. It’s acting like the battery

BendPak founder Don Henthorn passes away

Don Henthorn, owner and founder of BendPak Inc., peacefully passed away at home Thursday, March 28, at the age of 85. Under his leadership, BendPak has grown from a small machine shop to one of the world’s leading manufacturers of car lifts and automotive service equipment. Related Articles – ALI announces Lifting Points Guide now available in

Don-Henthorn-BendPak_Passing-1400
Sonnax introduces heavy-duty ‘A’ clutch backing plate

Sonnax has introduced a new heavy duty “A” clutch backing plate (part no. 35577-45) for Chrysler 845RE and 850RE, and ZF 8HP45, 8HP50 and 8HP51 transmissions. Sonnax says that this plate can eliminate the flexing/bowing of the clutch pack that leads to comebacks in these transmissions, and recommends installing them in units that have not

TransGo releases S4 regulator valve for 2018-on GM 8L45, 8L90

TransGo highlights its new oversize S4 regulator valve for 2018-on GM 8L45 and 8L90 transmissions. Related Articles – Aircat 1⁄4-in. mini die grinder released – Sonnax highlights Chrysler RFE Sure Cure kits – Alto introduces Ford 10R series cartridge filter According to TransGo, when General Motors made a change to the S4 regulator valve in both the

TransGo-8L90-S4LATE-TK-1400