RatioTek introduces new transmission tuner kits for Ford, BMW, ZF

RatioTek introduces new transmission tuner kits for Ford, BMW, ZF

RatioTek has introduced two new transmission tuner kits: one for Ford and BMW applications, the other for ZF transmissions.

The RT‐6R80‐PR and RT‐6R80‐PRX products are suited for Ford 6R60/75/80/90/100 and BMW ZF6HP26 ‐ ZF6HP28 six-speed rear-wheel drive applications from 2005 through 2022.

The RT‐8HP75‐PR and RT‐8HP75‐PRX tuner kits, meanwhile, are suited for ZF8HP45/70/90/95 eight-speed rear-wheel drive applications.

According to the company, the kits install easily without removing the transmission.

The company notes that PR kits are designed for the everyday rebuild, have a 12‐18% torque capacity increase. Latch and clutch regulator valves trigger more quickly shortening shifts.

PRX kits, however, are designed for the heavy-duty applications that have boosted turbos and power adders with 28‐38% torque capacity increases. Latch and clutch regulator valves trigger more quickly to the higher pressure levels shortening shifts.

You May Also Like

GFX announces 47-teeth differential gear for Toyota transmissions

GFX has introduced a new 47-teeth differential gear for Toyota transmissions, including the U660E. According to the company, the product is designed to replace years 2007 and on.

GFX-differential-gear-Toyota-600

GFX has introduced a new 47-teeth differential gear for Toyota transmissions, including the U660E. According to the company, the product is designed to replace years 2007 and on.

Alto releases Ford 5R55W/S wire harness repair kit

Alto has introduced a new aftermarket wire hardness repair kit with wire connectors for Ford 5R55W/S transmissions, model years 2002 to 2010. The Alto part no. is 137505NA. Related Articles – GFX announces new pump for Ford 6F35E – Rostra offers variable bleed solenoids for second generation Ford 6F35 – Georend highlights billet aluminum stator

Alto-Ford-Wire-Harness-1400
GFX announces new pump for Ford 6F35E

GFX has announced a new pump for the Ford 6F35E transmissions. The pump is for generation 2 models and has a snap ring on seal. According to the company, this pump is designed to replace OEM part no. RF9L8P-7A105CB for years 2013 and on. Related Articles – Dana announces new line of electric transmissions for trucks

GFX-Ford-pump-600
Rostra offers variable bleed solenoids for second generation Ford 6F35

Rostra announced that it offers 10 NH/NL variable bleed solenoids for bands 1–5 for the Ford 6F35 transmission (second generation). Touting an improved design, Rostra says that these solenoids can achieve improved sensitivity, reduced hysteresis over the OE design and highly accurate pressure control in the 6F35. Related Articles – Alto adds new Ford 8F35

Sonnax-6F35-Gen-2-VBS-Glam-600
Georend highlights billet aluminum stator for torque converters

Georend highlights its billet aluminum stator for torque converters. Related Articles – Sonnax highlights clutch backing plate for ZF transmissions – Alto adds new torque converter sealing ring set – Sonnax introduces S4 clutch control valve kit Georend says that torque converters with its billet aluminum stator also are built with lugged outer races that

Georend-one-way-roller-clutch-comparison-1400

Other Posts

Chrysler ZF8 generations 1 and 2 identification guide

In 2019, some Chrysler/Ram/Jeep applications that utilize the ZF8HP transmission moved to a second-generation unit with a new designation and numerous changes for better performance and durability. Gen. 1 units are classified as 8HP45, 8HP70 and 8HP90; while Gen. 2 are classified as 8HP50, 8HP75 and 8HP95. Internally, the Gen. 2 transmission had numerous hard

Tasc-Tip-April-Figure-1-Gen.-1-'B'-Brake-Components-1400
Alto introduces new kits for 10-speed Ford, Allison transmissions

Alto recently announced two new bushing kits for 10-speed transmissions. Related Articles – Raybestos Powertrain introduces new A8LR1 friction and steel clutch plates – Sonnax introduces remanufactured TEHCMs for 6L80/90 – Alto introduces bushing for Mercedes 722.6 The first is an 11-piece bi-metal bushing kit for the 10-speed Ford 10R60 transmission, model years 2020 and

Alto-10R60-Kit-1400
Raybestos Powertrain introduces new A8LR1 friction and steel clutch plates

Raybestos Powertrain announced a new complete unit GPZ friction clutch pack module and a new steel clutch pack module for the Hyundai / Kia A8LR1 transmission. Related Articles – Solera launches Identifix Shop Manager – TransTec extends coverage for 9T overhaul kits – Alto releases spring retainer, filter screw for 68FRE The RGPZ-287 A8LR1 GPZ

Sonnax introduces remanufactured TEHCMs for 6L80/90

Sonnax has introduced a new line of remanufactured TEHCMs for GM 6L80 and 6L90 transmissions. Each unit is fully electro-hydraulically tested to comply with OE performance and VIN-blanked for easy programming to any applicable vehicle, the company says. Related Articles – TransTec offers 8HP50/850RE overhaul kit – Alto adds friction and steel clutches for ZF