RatioTek releases valve body kits for Ford 10-speed transmissions

RatioTek releases valve body kits for Ford 10-speed transmissions

RatioTek has released new valve body kits that fit Ford 10R140 10-speed transmissions, model years 2020 and later.

According to the company, these increase torque capacity, and are installed from the bottom without removing the transmission.

There are two varieties available: PR kits and PRX kits. PR kits are designed for the everyday rebuild, and come with a 12 to 18% torque capacity increase, the company says. Latch and clutch regulator valves trigger more quickly, which the company says will shorten shifts.

PRX kits are designed for the heavy-duty applications that have boosted turbos and power adders with 28 to 38% torque capacity increases. Latch and clutch regulator valves trigger more quickly to the higher pressure levels, which the company says shortens shifts.

You May Also Like

Autel tablets approved for Nissan Central Gateway access

Autel has announced that its tablets have been approved for Nissan Central Gateway (CGW) access via AutoAuth, the aftermarket tool OE-authentication service, enabling registered users to access secured systems and perform complete diagnostics on certain late-model Nissans. By registering their shop and tablet at AutoAuth, Autel users can perform diagnostics and service tasks such as

Autel-Nissan-auto-auth

Autel has announced that its tablets have been approved for Nissan Central Gateway (CGW) access via AutoAuth, the aftermarket tool OE-authentication service, enabling registered users to access secured systems and perform complete diagnostics on certain late-model Nissans.

By registering their shop and tablet at AutoAuth, Autel users can perform diagnostics and service tasks such as clearing codes, bidirectional controls, Active Tests, Special Functions, and ADAS calibration on security gateway-equipped Nissan vehicles. As Stellantis did previously, Nissan implemented its security gateway to prevent unauthorized access to the vehicle network. 

Snap-on offers pliers racks for organization 

Snap-on has introduced a line of three pliers racks, to offer storage solutions for automotive repair shops. Related Articles – Alto releases 68RFE low-reverse sprag assembly – Sonnax introduces Ford 6R center support sleeve – Berkeley Standard introduces JFO11E / REOFO10A remanufactured pulley set Three pliers racks (part no. PLRK21, PLRK27, and PLRK30) are offered

snap-on-pliers-rack
Alto releases 68RFE low-reverse sprag assembly

Alto has released a low-reverse sprag assembly for the Chrysler 68RFE transmission, model years 2007 and on—14 roller, 36 spline. Related Articles – Alto releases GM to Volvo differential conversion kit – Sonnax introduces Ford 10R140 TCC signal damper piston kit – Toledo Trans-Kit 10L transmissions now available

Alto-GM-4T60E,-4T65E,-Differential-Conversion-Kit-1400
Sonnax introduces Ford 6R center support sleeve

Sonnax has introduced a hardened steel center support sleeve for Ford 6R60, 6R75 and 2009–later 6R80 transmissions. According to the company, users can restore proper hydraulic control and prevent future wear in these transmissions caused by the 3-5-R “B” clutch housing sealing rings by machining 2-6 “C” clutch housing bore (center support) and installing this

Berkeley Standard introduces JFO11E / REOFO10A remanufactured pulley set

Berkeley Standard has introduced a new remanufactured pulley set for the Jatco/Nissan JFO11E / REOFO10A continuously variable transmission. Related Articles – Sonnax introduces oversized cooler/lube flow control valve kit – Schaeffler releases TorCon 6L80 torque converter – American Powertrain adds GearStar automatic transmissions for Ford, Chevy, Mopar According to the company, this set includes the

Berkeley-Standard-3-1400
Other Posts
Shift Pointers: A 10R140 with a classic drivability complaint

A 2021 F-350 6.7L Super Duty using the 10R140 beast of a transmission recently came into Precision Auto Repair not upshifting when pulling a load only. On light throttle it would upshift, but not as high as tenth gear. Once the throttle was depressed it would downshift and no longer upshift. It displayed similar symptoms

Figure 2.
PRT launches 59 new complete strut assemblies

PRT announced the launch of 59 new complete strut assemblies for the North American market. Related Articles – Raybestos adds new Toyota UA80 / UB80 converter clutch plates – Sonnax introduces drop-in 4-5-6 sleeved accumulator piston kit for GM 6T series – BendPak announces upgraded Litestix work light The launch includes application coverage for Nissan Frontier, Toyota

Raybestos adds new Toyota UA80 / UB80 converter clutch plates

Raybestos has introduced a series of Toyota UA80 and UB80 converter clutch plates. They include: Related Articles – Sonnax introduces TCC apply limit switch valve kits for Chrysler RFE series – Schaeffler offers new LuK clutch kits – Transtar to offer recycled engines

Sonnax introduces drop-in 4-5-6 sleeved accumulator piston kit for GM 6T series

Sonnax has introduced a drop-in 4-5-6 sleeved accumulator piston kit (part no. 124740-68K). The company says users can recover hydraulic control and renew shift feel and performance in GM 6T70, 6T75, 6T80 (Gen. 2) transmissions by installing this kit. Related Articles – Sonnax introduces GM 6L80, 6L90 output planet saver kits – Alto introduces filters