Chips ahoy: What the microchip shortage means for the transmission industry - Transmission Digest

Chips ahoy: What the microchip shortage means for the transmission industry

A shortage of microchips and other automotive parts is creating a scarcity of new cars on dealership lots. Inventories of new cars to buy or lease are very constricted and aren’t likely to be back to normal for several months.

Jean-Marc Chery, CEO of chip manufacturing company STMicroelectronics, says the effects of the shortages are likely to linger until early 2023. While the chip and parts shortage has created an undersupply of new cars, it has, in turn, led to what CNN is calling a “scorching hot used car market,” with prices of used cars rising 10.5% in June; 45.2% in the last twelve months. The average age of vehicles is older as well, now 12.1 years—the first time that average has exceeded 12 years.

According to analytics and research company IHS Markit, new vehicles are predicted to make up about 5% of cars on the road, a decrease from last year’s 6.1% figure. Repair shops will benefit as many are deciding to purchase their leased vehicles, taking them off their warranties.

Older cars on the road lead to more transmission work for our industry in the long run. We know that the more miles there are on a car, the more likely the transmission is to break down. Used cars in need of repair get those repairs before being resold, unlike new cars returning to the dealership under warranty. The increase in used car sales will continue to heighten the need for updated transmission kits and parts to raise used car value and keep them running longer and more efficiently. Inadvertently, the chip shortage has helped the transmission aftermarket flourish, providing it more opportunities to sell transmission repairs as more people hold onto their older cars.

Cassidy Sollazzo works with social media for Precision International and is a graduate of UCLA. She is the daughter of Precision International Sales VP John Sollazzo.

You May Also Like

A guide to common GM, Ford and Nissan programming issues

One of the most common complaints I hear from shops when trying to install a new GM TCM is, “The module will not communicate.” While that might be partially true, by design they won’t communicate until they are programmed. If programming fails, there will be an “E” code set which will help you get to

One of the most common complaints I hear from shops when trying to install a new GM TCM is, “The module will not communicate.” While that might be partially true, by design they won’t communicate until they are programmed. If programming fails, there will be an “E” code set which will help you get to the root of your problem.

Shift of the shaft: Diagnosing Chrysler 48RE manual shaft issues

The TorqueFlite transmission has been around since mid-to-late 1950s. There have been many changes surrounding the manual shaft and rooster comb through the years. This transmission shaft controls the position of the manual valve that directs oil for the gear ranges, but it also is used for a Reverse light control as well as Park/Neutral

Sometimes, a diagnostic code is all you need

With ATSG having the opportunity to help shops solve problems, sometimes we get faced with some real doozies. A shop will call and give us a laundry list of DTCs, leaving us to think someone must have a bulkhead connector unplugged. We then go through the arduous task of deciding which codes prompted other codes

10L80 and 10R80 pump gear differences

You may have seen an article in the August 2023 issue of Transmission Digest called “GM 10L80: A new kind of pump noise,” which goes over how the front cover housing in the 10L80 is fitted with a converter drive gear and idler gear. The idler gear drives the pump’s driven gear, and is press

Top 20 Tools and Products: The Winners

Transmission Digest readers voted during the past several weeks to select this year’s top products and tools from those nominated in our December issue. This year, rather than separate contests, voting was for a combined tool and equipment contest, with 20 winners rather than 10. Winning entries appear in the following images, but are in

top20Feature-1400

Other Posts

Think pink: Curtis Price strikes out on his own and has Liberty Transmission and Auto Care stand out from the crowd

In 2018, Curtis Price, at 43 years old, found himself at a crossroads in his career in the transmission industry: unsure whether he could move up in the family business where he had worked for 20 years, or whether he should start his own. At the time he was working at Price’s Transmission in Virginia

Liberty-Transmission
Hidden problems: Three tales of electrical issues

In this article, I will discuss some vehicles with electrical issues. These issues were previously addressed by a different shop/tech, but the improper or incomplete repair resulted in these hidden problems that would appear later. Related Articles – Outgrowing the walls: The story of EVT Transmission Parts – Spotting different 68RFE designs through the years

Easy TH400, 4L80-E reverse servo setup: Craft your own tool

While not as sensitive as some shifting bands, the Reverse band adjustment on a TH400 or 4L80-E transmission is critical, and failure to get it right has tripped up even the best builders. There is nothing worse than getting the transmission installed, putting it in Reverse and then not going anywhere or having no engine

Outgrowing the walls: The story of EVT Transmission Parts

There’s an interesting business, one of our industry’s success stories, located in the greater Los Angeles area city of Compton, CA. Walter Quintanilla is the owner of EVT Transmission Parts, which supplies a full line of parts and supplies to rebuilders in the area and beyond. The company began as a Los Angeles transmission shop

January-cover2-1400