BendPak introduces new double-wide parking lifts - Transmission Digest

BendPak introduces new double-wide parking lifts

BendPak has introduced two new double-wide parking lifts: PL-12000DP and PL-12000DPS. BendPak says these lifts will allow shops to securely store four vehicles in two parking spots.

BendPak notes that each PL-12000DP and PL-12000DPS platform operates independently, so one can be lowered while the other side remains still. As a result, it’s only necessary to move a single vehicle out of the way to get to one parked above. The structure also provides double-car-width open front access, resulting in more efficient entry and exit. 

The PL-12000DP tall-rise, extended-length model has a maximum rise of 82.2 inches, 183-inch runways, and a drive-through height of 80.5 inches. The PL-12000DPS standard-rise, standard-length lift has a max rise of 70.2 inches, with 159-inch runways and a drive-through height of 68.5 inches. Both models have a total rated capacity of 12,000 lbs. / 6,000 lbs. per platform. They can handle cars, light trucks, motorcycles, ATVs, golf carts and other equipment, BendPak says. 

These parking lifts offer automatic safety locks at multiple heights, wide baseplates for stability and built-in front wheel stops. They are backed by BendPak’s five-year warranty, the company adds.

You May Also Like

Alto releases friction and steel module for ZF 6HP transmissions

Alto has introduced a new friction and steel module for ZF 6HP series transmissions. The module works with ZF 6HP19/X/A (model years 2004 and on) and ZF 6HP21/X (model years 2007 and on) for ZF, Audi, BMW and Volkswagen vehicles. Alto says that the product (part no. 143751X) features G3 frictions and Kolene steels.

Alto has introduced a new friction and steel module for ZF 6HP series transmissions. The module works with ZF 6HP19/X/A (model years 2004 and on) and ZF 6HP21/X (model years 2007 and on) for ZF, Audi, BMW and Volkswagen vehicles.

Alto says that the product (part no. 143751X) features G3 frictions and Kolene steels.

Sonnax introduces oversized low reverse/overdrive clutch regulator valve kit

Sonnax has introduced a new oversized low reverse/overdrive (4-5-6) clutch regulator valve kit (part no. 144740-43K) for Ford 6F35 transmissions, generations one, two and three. Related Articles – BendPak introduces new full-rise scissor lifts – Alto introduces aluminum oil pans for Chrysler transmissions – Sonnax introduces heavy-duty ‘A’ clutch backing plate Sonnax says the kit

BendPak introduces new full-rise scissor lifts

BendPak has introduced the new SP-7XE Series of full-rise scissor lifts. They are rated for a capacity of 7,000 lbs. and can raise most cars and light trucks nearly six feet. BendPak says these lifts are made for shops with space constraints. Related Articles – TransGo releases S4 regulator valve for 2018-on GM 8L45, 8L90 – American

Alto introduces aluminum oil pans for Chrysler transmissions

Alto has introduced new aluminum oil pans for Chrysler/Dodge A727, 46RE/RH, 47RE/RH and 48RE transmissions. There are two options: a ribbed design (pictured above) or a honeycomb design. Both come with a drain plug and 14 bolts. Related Articles – Aircat 1⁄4-in. mini die grinder released – Sonnax highlights Chrysler RFE Sure Cure kits – Alto introduces

Alto-028354A-1400
Sonnax introduces heavy-duty ‘A’ clutch backing plate

Sonnax has introduced a new heavy duty “A” clutch backing plate (part no. 35577-45) for Chrysler 845RE and 850RE, and ZF 8HP45, 8HP50 and 8HP51 transmissions. Sonnax says that this plate can eliminate the flexing/bowing of the clutch pack that leads to comebacks in these transmissions, and recommends installing them in units that have not

Other Posts

Can you jump-start an EV?

Here’s a real-world scenario: A customer brings their EV into your shop for service, and it’s been there for quite a while because the parts are on backorder. After a few weeks, you get in the vehicle to move it out of your way, and the ignition won’t turn on. It’s acting like the battery

BendPak founder Don Henthorn passes away

Don Henthorn, owner and founder of BendPak Inc., peacefully passed away at home Thursday, March 28, at the age of 85. Under his leadership, BendPak has grown from a small machine shop to one of the world’s leading manufacturers of car lifts and automotive service equipment. Related Articles – Transtar announces Texas product expansions – Shop Boss

Don-Henthorn-BendPak_Passing-1400
Premium Guard unveils line of transmission filter kits

Premium Guard, Inc. recently unveiled Premium Guard Select, a new line of transmission filter kits. “The new OEM-style transmission filter kits offer superior quality and reliability with unique features that enhance the installer experience and deliver peace of mind,” the company said. Related Articles – Sonnax introduces splined stub and sleeve kit – Top 20 Tools and Products:

Premium-Guard-Transmission-Filter-kits
Sonnax introduces splined stub and sleeve kit

Sonnax has introduced a one-piece carbon fiber splined stub and sleeve kit for overcoming driveshaft problems. Designed for 1350 series u-joints, this kit (part no. T35-28-350CFIK) bonds onto 3.5-in. I.D. carbon fiber tube. Sonnax says that it includes perfectly matched stub and sleeve components. Related Articles – Sonnax highlights TH400 heavy and extreme duty input shafts  –