Quality Transmission Service - Fix the Root Cause - Transmission Digest

Quality Transmission Service – Fix the Root Cause

Greene also focused on business as well. Analyzing the Alaskan market, he mentioned two ways to expand his business. One way was to find ways to reach what he calls the “outer demographic” of motorists who can’t come to Anchorage; he must go to them. Another way is to take advertising seriously.

Quality Transmission Service

Greene Nickell thinks about customers as well as business

Greene Nickell always had a dream of starting a transmission shop, and it became a reality in 2005. After a rocky start with little money, the business gathered traction.

Two years in, he had no choice but to expand as the volume of work was piling up. Over the years, Quality Transmission Service continued to thrive. It now may be one of the biggest transmission shops in Alaska, if not the biggest, he suggested.

“We were getting to the point where we were having to tell people it’s going to be two-three weeks. We didn’t want to do that. We wanted to supply them with what they needed,” Greene said.

He seems to be thinking about customers as well as the business.

“Every time I look at a transmission that’s broken, I think, what caused the thing to fail. To do a good job for the customer we have to fix the root cause of the failure.”

Greene also focused on business as well. Analyzing the Alaskan market, he mentioned two ways to expand his business. One way was to find ways to reach what he calls the “outer demographic” of motorists who can’t come to Anchorage; he must go to them. Another way is to take advertising seriously.

Consistent expansion

Along the way, multiple developments gave the business several boosts. Greene and a partner, with whom he worked during the first two years, rented a building with more space than they needed. However, they leased half the building to a diesel technician, who sent his transmission work to Quality Transmission Service.

“That’s what probably saved our bacon. We had spent most of our money setting up the equipment,” Greene said. “It was make it or break it.” By the end of the first year, they hired an R&R technician.

“I ran the front. I had a build bench just outside the office door,” Greene said. “After that, I wouldn’t say it was smooth sailing, but we started having income and paid the bills.” After the second year, the diesel tech moved out, and Greene expanded into the entire building.

Another opportunity arose when a large wrecking yard went out of business, and the owner offered Greene all the transmissions as a reasonable cost – about 600 cores already pulled out. Greene added a large parts room. This transaction enabled the business to avoid out-of-pocket expenditures for hard parts. In addition, funds could be used to re-invest in the building and, in the fifth year of operation, buy the building. The business now has a second building.

Seeking more customers

While the company has been growing, Greene is looking into more business from outlying areas. For some customers, they can’t come to you; you have to go to them.

He has roughly 100 transmissions ready to sell to the “bush,” places that may not be accessible by roads. And the state has only two main highways.

“In Alaska, it’s a different market,” he said. “There are a bunch of people here, but there are no roads to them. They might be only 300 miles from Anchorage, but it’s only accessible by plane or barge. They have cars out there. So I’m trying to expand – businesses are getting more of that work from those communities by free delivery to the airport, quick turnaround.”

One of the goals is to get online purchasing as a way to attract business from the bush.

The customer base of the shop is a radius of 15 miles, the scope of Anchorage. However, the reach could easily be 500 miles in any direction, he said.

On another marketing note, Greene wants to compete with other shops for work on diesel trucks.

“I want to come up with a catchy name. That’s what they’re doing. There’s Monster Transmission. You wouldn’t believe how many people would call — I want to get one of those Monster Transmissions. Customers get caught up in the advertising part of it. At first I thought it was silly, but now I think it’s not silly. I need to come up with something: ‘You want a heavy-duty tranny? Alaska Grizzly.’ Something with an Alaska theme.”

Climate, terrain, use

The shop has seven bays with lifts and three more bays without lifts. The main building is 7,300 sq. ft.; a rental building is 5,800 sq. ft.

Quality Transmission Service works on transmissions and the full drive train, but no general repair.

With a lot of manual transmissions, a hydraulic press comes in handy. They work on typical pickups and diesels, but they also work on high-end cars: VW, Audi, BMW.

The business finishes approximately 30-50 transmission projects per month, mostly rebuilt, as Greene prefers:

“Well, I’m pretty passionate about this business, and want to keep the business the way I want it. We do install a few remans, but only in rare conditions. If that’s what the customer wants, or we can’t get a hold of a core, but we try to rebuild everything we can.” That’s one kind of customer service.

Greene said he often ruminates about vehicles that come into the shop and how he might be able to fix the root cause of the problem.

“With an off-road vehicle, it might be overheating, maybe he’s overworking it. We do we have to do. I can sell the customer the Cadillac package and charge a lot of money. But I’m not going to the root cause that way. I think that’s a waste of their money. By figuring out what they need – tailoring a transmission in a package that’s going to be: a) a reasonable price, b) do what needs to be done, and c) not break the bank.”

This being Alaska, you won’t see many two-wheel-drive vehicles there, Greene said. In any case, terrain and climate take tolls on transmissions.

“The other thing is that Alaska is an extremely recreational state,” he said. “Everybody has a boat that we’re towing, a camper, or something they’re towing by their vehicle. That’s a use factor, too. It’s extremely mountainous around here. They’re pulling these campers and boats. They’re overheating the transmissions. … People go nuts in the summer. In the daylight, that’s a factor, too – 22 hours of sunlight, so they go nonstop doing these things. They go clamming on the beach with the truck, get it stuck in the sand, and burn the transmission out. That’s one scenario.

“There’s so much to talk about here.”

You May Also Like

Don’t fear customer complaints about CVTs

Continuously Variable Transmissions, or CVTs, are more common than you think. Audi, Subaru, Nissan, Ford, GM and many other automakers use CVT transmissions in cars and SUVs. There is no way to avoid them. Chances are there is one in your shop right now. What does CVT mean for technicians? On the maintenance side, a

CVT-Transmission-2

Continuously Variable Transmissions, or CVTs, are more common than you think. Audi, Subaru, Nissan, Ford, GM and many other automakers use CVT transmissions in cars and SUVs. There is no way to avoid them. Chances are there is one in your shop right now.

What does CVT mean for technicians? On the maintenance side, a CVT requires more or the same frequency of fluid and filter changes as a conventional automatic transmission, and many of the basic procedures are the same. On the diagnostic side, a CVT is less complicated internally than a six- or nine-speed transmission. Diagnostics with a scan tool are about the same. On the service side, while you may never pull a variator or belt out of a CVT, you can service components like sensors, pumps and valve bodies. The point here is not to fear a customer complaint about a CVT. 

2024 State of the Powertrain Industry

The Transmission Digest Annual Survey of Retail Shops has served as benchmark and planning tool for the industry now for the past 38 years. Charts and tables in this study are based on a survey of subscribers that was conducted early this year.  Related Articles – Powertrain industry directory and buyer’s guide 2024 – Shift

state-on-industry-feature-1400
Powertrain industry directory and buyer’s guide 2024

This is the latest in TD’s annual series of directories for the powertrain industry. Companies that supply products to the powertrain aftermarket are listed in alphabetical order. Because data changes frequently, only organizations that have updated information with Transmission Digest in the recent past are included. Related Articles – Shift of the shaft: Diagnosing Chrysler 48RE manual shaft

Powertrain-Industry-Directory
Shift Pointers: A Chrysler 300 no-shift complaint

The case study has to do with a 2009 Chrysler 300 C 5.7L Nag1 RWD with 71,923 miles on it (see Figure 1, above). Related Articles – Top 20 Tools and Products: The Winners – Performance supplier listings 2024 – Shift Pointers: What to do when the 62TE TRS tab breaks It is based on

A guide to common GM, Ford and Nissan programming issues

One of the most common complaints I hear from shops when trying to install a new GM TCM is, “The module will not communicate.” While that might be partially true, by design they won’t communicate until they are programmed. If programming fails, there will be an “E” code set which will help you get to

Other Posts

Complete the 2024 transmission shop survey for a chance to win a gift card

Every year, Transmission Digest conducts the Retail Shop Survey. This survey will take five minutes or less. The results of this survey will appear in the March edition of our Powertrain Bulletin email newsletter, and should serve as a valuable benchmark for your business. Your responses will be kept confidential and reported only in the

Think pink: Curtis Price strikes out on his own and has Liberty Transmission and Auto Care stand out from the crowd

In 2018, Curtis Price, at 43 years old, found himself at a crossroads in his career in the transmission industry: unsure whether he could move up in the family business where he had worked for 20 years, or whether he should start his own. At the time he was working at Price’s Transmission in Virginia

Liberty-Transmission
Hidden problems: Three tales of electrical issues

In this article, I will discuss some vehicles with electrical issues. These issues were previously addressed by a different shop/tech, but the improper or incomplete repair resulted in these hidden problems that would appear later. Related Articles – Valve body and component suppliers: A comprehensive list – Shift Pointers: Failures caused by incorrect tire sizes

Easy TH400, 4L80-E reverse servo setup: Craft your own tool

While not as sensitive as some shifting bands, the Reverse band adjustment on a TH400 or 4L80-E transmission is critical, and failure to get it right has tripped up even the best builders. There is nothing worse than getting the transmission installed, putting it in Reverse and then not going anywhere or having no engine