A wealth of information: Recapping the TCRA Annual Seminar

A wealth of information: Recapping the TCRA Annual Seminar

The profitable and proper remanufacturing of torque converters served as the focus for the 24th annual seminars and meetings of the Torque Converter Rebuilders Association (TCRA). The two-day event was held in the Detroit area in June and drew approximately 100 participants. As has been the case since the first of these converter segment get-togethers, there were both tours of interest and ample social gatherings. To the participants, the TCRA seminar is an event!

A Thursday evening, pre-event hospitality was sponsored by core supplier WolfPack Enterprises at the Detroit Marriott Troy, which served TCRA as hotel and conference facility for the weekend. As is the group’s tradition, Fridays are devoted to tours. Some years those visit member reman facilities; others, as was the case this year, they venture to nearby points of interest. The group toured Ford’s Rouge River facility (pictured above) that included a look inside the F-150 assembly operations. Following that the group moved on to the Henry Ford Museum where a boxed lunch was provided by WolfPack.

After returning to the conference center, the annual member meeting was held to elect board members, officers and conduct association business. A Sonnax-sponsored evening reception followed at the General Motors Heritage Museum in Sterling Heights. That 81,000 square foot building houses more than 165 GM production and concept vehicles displayed based on design, technical or sales importance to the automaker’s history.

TCRA has traditionally filled its conference Saturday with seminars and guest speakers. This year was no exception as an early morning start was preceded by a hosted breakfast sponsored by BorgWarner Transmission Products. Seminar break snacks and beverages were hosted by Transmission Specialties and Recon Torque Converters.

The 2022 TCRA speakers. From left to right: Joe Rivera, Alfredo Jiminez, Bobby Mace, Blake Carter, Bob Warnke, John Parmenter, Robbie Ferguson and Rodger Bland.

Gears Magazine publisher Rodger Bland kicked off the educational series of speakers with an inspirational message and the day of seminars was topped off with Transmission Digest Publisher Bobby Mace’s presentation of survey and market data that influences the converter aftermarket.

In between those two was a combination of technical seminars related to torque converter rebuilding with a notable emphasis on performance converters. This emphasis was represented by a pair of presentations from Blake Carter of SunCoast Performance, who concentrated on performance 10-speed transmission and converter issues; and Joe Rivera, founder of the ProTorque brand that is now a product line of Boninfante Racing. Joe’s talk focused on the process and culture for being successful in the performance torque converter business.

Sonnax Vice President of Technical Development Bob Warnke spoke about complaints blamed on the torque converter that quite often have origin in the valve body or other non-converter transmission problems. As part of his presentation, Warnke announced his retirement, effective later this year, from Sonnax.

Covering similar torque converter concerns was a presentation from John Parmenter, a transmission shop owner who serves as a trainer and product development consultant to transmission kit packager Precision International.

Rounding out the seminar program were speakers from supplier companies. Robbie Ferguson from Raybestos Powertrain discussed important aspects of friction paper manufacturing and bonding techniques that prolong the life of the converter. Schaeffler’s Alfredo Jimenez presented a look at some of the technical advances that are being applied to current and near future converters to increase desired performance while reducing weight and load on the powertrain. Steve Jaussaud of Sonnax explained that supply chain issues were waning as the value of backorders have been cut in half in the past few months. Jaussaud also informed Sonnax customers about some changes and some new products, ending with the news that a new company transmission parts catalog will be mailing soon to include technical content that helps identify whether particular issues are related to the transmission or the torque converter.

Read more of our coverage of this year’s TCRA seminar here.

You May Also Like

Powertrain industry directory and buyer’s guide 2024

This is the latest in TD’s annual series of directories for the powertrain industry. Companies that supply products to the powertrain aftermarket are listed in alphabetical order. Because data changes frequently, only organizations that have updated information with Transmission Digest in the recent past are included. Every precaution has been taken in the preparation of these listings; however,

Powertrain-Industry-Directory

This is the latest in TD’s annual series of directories for the powertrain industry. Companies that supply products to the powertrain aftermarket are listed in alphabetical order. Because data changes frequently, only organizations that have updated information with Transmission Digest in the recent past are included.

Every precaution has been taken in the preparation of these listings; however, the publisher assumes no liability for errors or omissions. Peruse the Buyer’s Guide in the window below. The first section of pages shows company listings alphabetically; the second section has them by product category.

Shift Pointers: A Chrysler 300 no-shift complaint

The case study has to do with a 2009 Chrysler 300 C 5.7L Nag1 RWD with 71,923 miles on it (see Figure 1, above). Related Articles – A guide to common GM, Ford and Nissan programming issues – Shift of the shaft: Diagnosing Chrysler 48RE manual shaft issues – Sometimes, a diagnostic code is all

A guide to common GM, Ford and Nissan programming issues

One of the most common complaints I hear from shops when trying to install a new GM TCM is, “The module will not communicate.” While that might be partially true, by design they won’t communicate until they are programmed. If programming fails, there will be an “E” code set which will help you get to

Shift of the shaft: Diagnosing Chrysler 48RE manual shaft issues

The TorqueFlite transmission has been around since mid-to-late 1950s. There have been many changes surrounding the manual shaft and rooster comb through the years. This transmission shaft controls the position of the manual valve that directs oil for the gear ranges, but it also is used for a Reverse light control as well as Park/Neutral

Sometimes, a diagnostic code is all you need

With ATSG having the opportunity to help shops solve problems, sometimes we get faced with some real doozies. A shop will call and give us a laundry list of DTCs, leaving us to think someone must have a bulkhead connector unplugged. We then go through the arduous task of deciding which codes prompted other codes

Other Posts

Sonnax introduces GM 6L80, 6L90 output planet saver kits

Sonnax has introduced new output planet saver kits for GM 6L80 and 6L90 transmissions. The company says these kits can repair and prevent common concerns and save the planetary assembly when installed. Related Articles – Transtar to offer recycled engines – Alto introduces filters for GM 6L series – PRT launches 30 new complete strut

Sonnax introduces Smart-Tech clutch kit for GM 4L series

Sonnax has introduced a new Smart-Tech clutch kit for optimizing clutch capacity and guarding against clutch burnup in GM 4L60, 4L60-E, 4L65-E and 4L70-E transmissions. This kit (part no. 77734-01K) includes eight .067-in. BorgWarner high-energy frictions and seven .095-in. Lindered steels recommended for use with Sonnax Smart-Tech input housings. Related Articles – Force Control Industries

Sonnax introduces oversized low reverse/overdrive clutch regulator valve kit

Sonnax has introduced a new oversized low reverse/overdrive (4-5-6) clutch regulator valve kit (part no. 144740-43K) for Ford 6F35 transmissions, generations one, two and three. Related Articles – American Powertrain introduces ProTwin disc clutch for GM, Ford and Mopar – Snap-on debuts new general service tool set  – Gray Tools introduces insulated hex bit socket

Sonnax introduces heavy-duty ‘A’ clutch backing plate

Sonnax has introduced a new heavy duty “A” clutch backing plate (part no. 35577-45) for Chrysler 845RE and 850RE, and ZF 8HP45, 8HP50 and 8HP51 transmissions. Sonnax says that this plate can eliminate the flexing/bowing of the clutch pack that leads to comebacks in these transmissions, and recommends installing them in units that have not