Flo-Dynamics releases new transmission flushers - Transmission Digest

Flo-Dynamics releases new transmission flushers

G-Tec by Flo-Dynamics announced the release of two new heavy-duty transmission flushers.

The first model, #TTCF-9A (pictured above), has an adjustable flow rate from 1 to 8 gallons per minute, specially developed for vehicles ranging from automobiles to heavy duty transmission cooling systems.

Users can select from multiple flush cycles ranging from 15-120 minutes and verify system cleanliness by checking the reusable 60-micron cleanable filter screen. The G-Tec heated flusher will flush and clean transmission coolers, lines or other component of contamination, sludge, varnish deposits and particles from a failed transmission, the company says.

The company is also manufacturing a non-variable heavy-duty base model designed for lower-volume shops, the #TTCF-9B.

Both heavy-duty flusher models are being produced at Flo-Dynamics’ Elkhart, Indiana manufacturing plant and meet the requirements of OE procedures when replacing transmissions. Both models have been approved by Allison Transmission, the company notes.

You May Also Like

Sonnax highlights boost valve kits for Aisin Seiki transmissions

The drop-in K1 apply boost valve kit and lockup boost valve kit are available from Sonnax.

Sonnax has introduced new valve kits for Aisin Seiki AS66RC and AS69RC transmissions. The drop-in K1 apply boost valve kit (part no. 122740-29K) and lockup boost valve kit (part no. 122740-30K) are available from Sonnax. The company says these kits can restore proper hydraulic control and renew line pressure performance in these Aisin Seiki transmissions.

Alto offers filter kit for GM TR-9080 DCT

The kit is for the C8 Corvette, model years 2020 and on.

GFX adds new pump for vintage Powerglide models

GFX announced a new pump component for GM Powerglide models, covering several vintage model years: 1950 through 1973. Related Articles – Alto introduces Ford Mustang cartridge filter kit – TransTec updates 6F35 Gen 1 overhaul kits – Alto introduces molded piston kit for GM 9T50, 9T65

GFX-Powerglide-Pump-600
Alto introduces Ford Mustang cartridge filter kit

Alto has introduced a cartridge filter kit for Ford TR-9070 DCT seven-speed models, fitting the Mustang GT500 with 5.0L and 5.2L engines. The filter kit (part no. 239940) comes with an o-ring and five bolts. Related Articles – Sonnax releases Smart-Tech drum module for TH400 racing applications – Sonnax introduces PR boost valve and o-ringed

TransTec updates 6F35 Gen 1 overhaul kits

TransTec announced that its Ford 6F35 Gen 1 overhaul kits have been updated to include a new Duraprene gasket and aluminum spacer (pictured above). This new gasket and spacer are used in place of the silicone sealant the OEM uses. Related Articles – Ingersoll Rand introduces new air hammer for shop work – Milwaukee introduces

Other Posts

Sonnax introduces Smart-Tech drum module for racing applications

Sonnax has introduced the Smart-Tech drum module (part no. 34555-01K) for the GM TH400. Designed for racing applications, this kit increases wheel HP, improves acceleration and reduces shock on shifts while ramping up durability and safety, the company says.  Related Articles – TransTec introduces Power Steering Gear Seal Kit for Jeep Wrangler – Sonnax highlights

TransTec introduces Power Steering Gear Seal Kit for Jeep Wrangler

TransTec has introduced a new Power Steering Gear Seal Kit for Jeep Wrangler. Related Articles – Bosch updates ADS, ADS X scan tools – Repairify introduces asTech All-in-One, asTech Mini diagnostics devices – Sonnax highlights main pressure regulator valve kit According to TransTec, the gear seal kit includes everything needed for a complete repair, including

TransTec-Power-Steering-1400
Sonnax highlights oversized low overrun valve kit

Sonnax highlights its oversized low overrun valve kit #77754-62K, which the company says can restore hydraulic integrity of the low/reverse clutch circuit and salvage worn valve bodies in GM 4L60-E, 4L65-E and 4L70-E transmissions if installed after reconditioning the bore. This kit requires Sonnax tool kit F-77754-TL62 for installation. Related Articles – GFX introduces variety

Sonnax-77754-62K-600
Raybestos adds new clutches for GM 8L45

Raybestos Powertrain has introduced two new clutch packs for the GM 8L45. Related Articles – GFX announces new friction plate for John Deere transmissions – Sonnax introduces Second Gear Servo Kit – BendPak introduces Ergochair ERGO-RS for technicians The first is a GPZ friction clutch pack (part no. RGPZ-285) for model years 2016 and on of the

Raybestos-group-1400