ATI introduces new e-clutch hub for ZF8HP51 - Transmission Digest

ATI introduces new e-clutch hub for ZF8HP51

ATI Performance Products has introduced its new billet aluminum E-Clutch Hub for fifth generation Toyota Supras and BMW vehicles equipped with ZF8HP51 automatic transmissions. This new ATI part no. 711014 is a direct replacement for the OEM part no. ZF-1101-471-029 and is available now.  

According to ATI, for this new part, improvements were made to all weak areas with bigger radii and more material. More oil passages and slots were added to allow maximum flow. The company also touts improved strength, including the following:

  • Improved oil flow and distribution
  • 76% stronger tensile strength over OEM material
  • 192% higher yield strength over OEM material
  • 8% more elongation before break than OEM

You May Also Like

Sonnax releases Subaru TR580 boost valve kit

Sonnax has released a new drop-in TCC boost valve kit for Subaru TR580 transmissions. Sonnax says users can restore hydraulic integrity to the TCC circuit with tightly controlled tolerances in these transmissions by installing this kit (part no. 823740-12K). This kit includes a steel valve that combats premature wear and wear-resistant sleeves, the company says.

Sonnax-823740-12K-600

Sonnax has released a new drop-in TCC boost valve kit for Subaru TR580 transmissions. Sonnax says users can restore hydraulic integrity to the TCC circuit with tightly controlled tolerances in these transmissions by installing this kit (part no. 823740-12K). This kit includes a steel valve that combats premature wear and wear-resistant sleeves, the company says.

Alto releases TR60-SN torque converter steels

Alto has released a new line of torque converter steels for the BorgWarner/Aisin Warner TR60-SN transmission. The product covers model years 2004 and on. Related Articles – Sonnax releases GM 6L80, 6L90 low/reverse sprag rebuild kits – Freudenberg-NOK adds new line of TransTec bonded pistons – Sonnax highlights intermediate clutch backing plates for GM transmissions

Alto-185717-320-1400
Sonnax releases GM 6L80, 6L90 low/reverse sprag rebuild kits

Sonnax introduced a new low/reverse sprag rebuild kit for GM 6L80 and 6L90 transmissions. The company says users can use this kit to replace the element, retainer plate, end caps and snap ring in these transmissions without buying an entire sprag assembly. Related Articles – Sonnax highlights center support snap ring for Ford 6R series

Sonnax-104642-80SK-600
Freudenberg-NOK adds new line of TransTec bonded pistons

Freudenberg-NOK has announced a new line of TransTec bonded pistons. According to the company, Freudenberg-NOK bonded pistons are engineered and manufactured by the same machinery and same people as FN pistons, and are made in New Hampshire. Transmission models covered include the ZF 8HP45 and 8HP70, the Chrysler 62TE and the GM 6L80/90. Related Articles

TransTec-Bonded_Pistons-1400
Sonnax highlights intermediate clutch backing plates for GM transmissions

Sonnax highlights its heavy-duty intermediate clutch backing plates for GM 4L80-E, 4L85-E and TH400 transmissions. Both backing plates are compatible with OE and aftermarket cases, the company says. Related Articles – Autel introduces alignment and ADAS lifts – BendPak introduces new double-wide parking lifts – Alto adds new filter for Toyota CVTs Plates available include:

Sonnax-34144HD-01-600

Other Posts

TransTec adds new overhaul kit for Honda CVTs

Freudenberg-NOK has launched a new TransTec Honda CVT overhaul kit.  The kit number is 49477913 and it covers the following applications: Related Articles – Dorman introduces new torque converter solenoid for Subaru – ATI introduces pressure regulator valve for Powerglide valve B – Alto introduces piston kit for Ford, GM 10-speed transmissions The company says

Dorman introduces new torque converter solenoid for Subaru

Among new products released by Dorman is an OE FIX torque converter lock-up solenoid (part no. 926-408) that the company says is designed to match the fit and function of the original part on almost four million 2012-2020 Subaru vehicles. This new repair solution allows the replacement of just the failed solenoid rather than the

Dorman-Torque-Converter-Solenoid-600
ATI introduces pressure regulator valve for Powerglide valve B

ATI Performance Products has introduced a new OEM-style pressure regulator valve for Powerglide valve bodies. According to the company, this OEM-style replacement and will work with OEM mating parts with no modifications. The part no. is 203181 and the valve was made in America. Related Articles – Alto introduces new front pump cover for Chrysler

ATI-203181
Alto introduces piston kit for Ford, GM 10-speed transmissions

Alto has introduced a new three-piece molded piston kit for Ford and GM 10-speed transmissions. The kit covers Ford 10R80 and GM 10L80/90 transmissions, model years 2017 and on. The Alto part no. is 231670. Related Articles – GFX announces low-pressure drop oil cooler – TransTec introduces stator sleeve tool kit – GFX introduces filter

Alto-231670-1400