All Drive Transmission, Des Moines, Iowa - Transmission Digest

All Drive Transmission, Des Moines, Iowa

The major repairs are getting less and less, and the small repairs are getting more and more, said Randall Garrett, owner of All Drive Transmission, Des Moines, Iowa.

Share What You Know: People Will Listen

Randall & Vicky Garrett, with small staff, thrive by adapting, learning

The major repairs are getting less and less, and the small repairs are getting more and more, said Randall Garrett, owner of All Drive Transmission, Des Moines, Iowa.

“When we first started out, that was back when there were 350s and 400s, back in the ’80s. There was a lot of major rebuilding. We have more minor repairs now – electronic problems, speed sensor and solenoid problems,” he said. “We’ve had to diversify and get a little more involved with differential repairs and some light automotive repair.”

Randall is looking into expanding the amount of general repair work.

“At this time, it’s something we’re toying with, but as busy as we are, we have enough to handle at this point. If I were to add some technicians to take that on, that’s what I’m looking at.”

The shop has some important assets that are keeping the operation in good shape:

• Space for stocking parts and units: Randall keeps a large inventory of parts, and faster-moving transmissions are in stock.

• The willingness to work on all domestic and import vehicles as possible. They work on 1-ton trucks and F-450s and F-550s.

• An emphasis on training through ATSG and ATRA, providing a nationwide warranty and regular technical seminars

• The affiliation with Certified Transmission, providing quality remanufactured transmissions

• Long-time, capable technicians

Randall and a business partner opened the shop in 1984, bought property and built a small shop from scratch: a three-bay, two-man shop. Randall bought out the partner in 1999.

Over the years, he acquired more property and expanded the building twice, increasing the space by a factor of five. Now the car count is 20-40 per week from customers typically from a radius of 10 miles and others from 40-50 miles.

Retail & wholesale

Randall does not charge for looking at a vehicle.

“We don’t charge for initial inspection, road test or diagnosis,” he said. “We scan the vehicle, check it over externally, and provide from there a determination of what repairs may be needed. We don’t charge for that service, which brings a lot of people in. Some of them just want you to scan them and read the codes. We just do it because we like to provide this service.

“It’s something we like to do. Someone will call with a technical question they might have, some repair question, and we provide free information for that. It’s not something we don’t feel we can’t share. We share a lot of that.”

At All Drive Transmission, the breakdown of work is 65% retail, 35% wholesale.

“I seem to be a go-to guy for technical information on a lot of things. A lot of their customers have established a relationship where we handle a lot of their questions and help them with their work with their customers.”

Employees, owners

The Garretts work in the shop. Vicki, his wife, serves as a receptionist and bookkeeper, and Randall does transmission work and manages the parts inventory, among ownership responsibilities.

The small staff has been very loyal – such that Randall’s first hire, Don Blasky in 1985, has been working there ever since. “He’s a good friend and a good technician and someone we’re proud to have here,” Randall said, emphasizing that he’s pleased with the whole crew.

Don – and Danny Swackhammer who started there in 2000 – are the two rebuilders. They also pick up other kinds of work. R&R tech Pat Scott has worked at All Drive since 2002. All the technicians help with R&R and general service.

Must have parts, & more

Pondering how his shop stands out, Randall mentioned quality of work, reputation built over more than three decades, and customer service. One key aspect is ready access to parts.

“I started from a mechanical background. I didn’t jump right into ownership right off the bat,” Randall said. “As far as a technician’s standpoint, I’ve always been a real strong believer that you need to have the parts. You need to have the parts in stock in able to turn around the vehicles as quick as you could. A vehicle tying up your bay because you don’t have parts is costing you money, too. And the technician is able to stay focused on what he needs to do.”

Moreover, an owner must adapt to the changes in the industry. “Currently we don’t do hybrids,” Randall said. “We’re looking at doing more of that. If I had a technician with training in that area, we could do more with that.”

Affiliation with Certified Transmission continues to bring future-oriented outcomes. “A lot of units in the past were hard to price, with having remanufactured transmissions available, now I’m able to price up front what kind of repairs are needed and what they would cost.”

Beyond

The Garretts have not set plans for retirement, but they enjoy their vacation home in Arkansas. “We get down there when we can, and some day we’ll retire. I’d just dabble in what I like to do. I’ve done a lot of custom work on vehicles. We’re currently doing a ’64 Corvette for my brother-in-law,” Randall said. “If I retired, I’d probably do more of that kind of work.”

One thing that Randall finds satisfying that might delay retirement: surprising a customer who had been expecting the worst in the way of a bill.

“As I said, we’ve been doing a lot of minor repairs on vehicles than we ever have, and fixing a lot of things without a complete rebuilt. Sometimes they don’t expect that, and they’re super-pleased that we treat them right and try to care for them the right way.”

You May Also Like

Don’t fear customer complaints about CVTs

Continuously Variable Transmissions, or CVTs, are more common than you think. Audi, Subaru, Nissan, Ford, GM and many other automakers use CVT transmissions in cars and SUVs. There is no way to avoid them. Chances are there is one in your shop right now. What does CVT mean for technicians? On the maintenance side, a

CVT-Transmission-2

Continuously Variable Transmissions, or CVTs, are more common than you think. Audi, Subaru, Nissan, Ford, GM and many other automakers use CVT transmissions in cars and SUVs. There is no way to avoid them. Chances are there is one in your shop right now.

What does CVT mean for technicians? On the maintenance side, a CVT requires more or the same frequency of fluid and filter changes as a conventional automatic transmission, and many of the basic procedures are the same. On the diagnostic side, a CVT is less complicated internally than a six- or nine-speed transmission. Diagnostics with a scan tool are about the same. On the service side, while you may never pull a variator or belt out of a CVT, you can service components like sensors, pumps and valve bodies. The point here is not to fear a customer complaint about a CVT. 

2024 State of the Powertrain Industry

The Transmission Digest Annual Survey of Retail Shops has served as benchmark and planning tool for the industry now for the past 38 years. Charts and tables in this study are based on a survey of subscribers that was conducted early this year.  Related Articles – Powertrain industry directory and buyer’s guide 2024 – Shift

state-on-industry-feature-1400
Powertrain industry directory and buyer’s guide 2024

This is the latest in TD’s annual series of directories for the powertrain industry. Companies that supply products to the powertrain aftermarket are listed in alphabetical order. Because data changes frequently, only organizations that have updated information with Transmission Digest in the recent past are included. Related Articles – Shift of the shaft: Diagnosing Chrysler 48RE manual shaft

Powertrain-Industry-Directory
Shift Pointers: A Chrysler 300 no-shift complaint

The case study has to do with a 2009 Chrysler 300 C 5.7L Nag1 RWD with 71,923 miles on it (see Figure 1, above). Related Articles – Top 20 Tools and Products: The Winners – Performance supplier listings 2024 – Shift Pointers: What to do when the 62TE TRS tab breaks It is based on

A guide to common GM, Ford and Nissan programming issues

One of the most common complaints I hear from shops when trying to install a new GM TCM is, “The module will not communicate.” While that might be partially true, by design they won’t communicate until they are programmed. If programming fails, there will be an “E” code set which will help you get to

Other Posts

Complete the 2024 transmission shop survey for a chance to win a gift card

Every year, Transmission Digest conducts the Retail Shop Survey. This survey will take five minutes or less. The results of this survey will appear in the March edition of our Powertrain Bulletin email newsletter, and should serve as a valuable benchmark for your business. Your responses will be kept confidential and reported only in the

Think pink: Curtis Price strikes out on his own and has Liberty Transmission and Auto Care stand out from the crowd

In 2018, Curtis Price, at 43 years old, found himself at a crossroads in his career in the transmission industry: unsure whether he could move up in the family business where he had worked for 20 years, or whether he should start his own. At the time he was working at Price’s Transmission in Virginia

Liberty-Transmission
Hidden problems: Three tales of electrical issues

In this article, I will discuss some vehicles with electrical issues. These issues were previously addressed by a different shop/tech, but the improper or incomplete repair resulted in these hidden problems that would appear later. Related Articles – Valve body and component suppliers: A comprehensive list – Shift Pointers: Failures caused by incorrect tire sizes

Easy TH400, 4L80-E reverse servo setup: Craft your own tool

While not as sensitive as some shifting bands, the Reverse band adjustment on a TH400 or 4L80-E transmission is critical, and failure to get it right has tripped up even the best builders. There is nothing worse than getting the transmission installed, putting it in Reverse and then not going anywhere or having no engine