RatioTek introduces new transmission tuner kits for Ford, BMW, ZF

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Transmission Digest - Babcox Media
Helping transmission shops achieve successful and profitable operation.
Products

RatioTek introduces new transmission tuner kits for Ford, BMW, ZF

Alex Crissey
By Alex Crissey
Published:
RatioTek-RT-8HP75-to-combine

RatioTek has introduced two new transmission tuner kits: one for Ford and BMW applications, the other for ZF transmissions.

Related Articles

The RT‐6R80‐PR and RT‐6R80‐PRX products are suited for Ford 6R60/75/80/90/100 and BMW ZF6HP26 ‐ ZF6HP28 six-speed rear-wheel drive applications from 2005 through 2022.

The RT‐8HP75‐PR and RT‐8HP75‐PRX tuner kits, meanwhile, are suited for ZF8HP45/70/90/95 eight-speed rear-wheel drive applications.

According to the company, the kits install easily without removing the transmission.

The company notes that PR kits are designed for the everyday rebuild, have a 12‐18% torque capacity increase. Latch and clutch regulator valves trigger more quickly shortening shifts.

PRX kits, however, are designed for the heavy-duty applications that have boosted turbos and power adders with 28‐38% torque capacity increases. Latch and clutch regulator valves trigger more quickly to the higher pressure levels shortening shifts.

You May Also Like

Products

TransGo introduces 62TE high pressure kit for vans

TransGo recently released a high pressure tuneless reprogramming kit for 62TE transmissions, model years 2007 and on. The company says it is specifically suited for work and passenger vans like the Ram ProMaster. According to the company, a recalibrated pressure curve in this kit delivers increased clutch and TCC holding capacity with short, clean shifts

Alex Crissey
By Alex Crissey
Published:

TransGo recently released a high pressure tuneless reprogramming kit for 62TE transmissions, model years 2007 and on. The company says it is specifically suited for work and passenger vans like the Ram ProMaster.

According to the company, a recalibrated pressure curve in this kit delivers increased clutch and TCC holding capacity with short, clean shifts at all throttle openings. A 26% overall increase in line pressure takes this unit from 60-135 PSI to 75-169 PSI, the company shared.

Read Full Article

More Products Posts
OTC releases TJHP15 transmission jack 

OTC has released the new TJHP15 transmission jack. The jack is air-assisted and has a 1,500-lb. capacity. Related Articles – American Powertrain introduces ProTwin disc clutch for GM, Ford and Mopar – Sonnax introduces Smart-Tech clutch kit for GM 4L series – Snap-on debuts new general service tool set  According to the company, features include

By Alex Crissey
American Powertrain introduces ProTwin disc clutch for GM, Ford and Mopar

American Powertrain announced that it now offers a new ProTwin twin disc clutch kit for GM, Ford and Mopar performance applications. The kit comes with a billet steel flywheel, pressure plate, two drive discs, floater, flywheel crank bolts, pilot bearing and alignment tool. Each clutch kit comes fully balanced and features 1100 ft./lbs. of torque

By Alex Crissey
Sonnax introduces Smart-Tech clutch kit for GM 4L series

Sonnax has introduced a new Smart-Tech clutch kit for optimizing clutch capacity and guarding against clutch burnup in GM 4L60, 4L60-E, 4L65-E and 4L70-E transmissions. This kit (part no. 77734-01K) includes eight .067-in. BorgWarner high-energy frictions and seven .095-in. Lindered steels recommended for use with Sonnax Smart-Tech input housings. Related Articles – BendPak introduces new

By Alex Crissey
Snap-on debuts new general service tool set 

Snap-on has introduced a new 33-piece tool set for general car service. The 233FSMBFR 33-Piece 3/8in. Drive General Service Set offers tools in a closed cell cross-linked foam case. Related Articles – TransGo releases S4 regulator valve for 2018-on GM 8L45, 8L90 – American Powertrain introduces new transmission install tool and seal protector – Mayhew introduces

By Alex Crissey

Other Posts

A guide to common GM, Ford and Nissan programming issues

One of the most common complaints I hear from shops when trying to install a new GM TCM is, “The module will not communicate.” While that might be partially true, by design they won’t communicate until they are programmed. If programming fails, there will be an “E” code set which will help you get to

By Peter Fink Jr.
Aircat 1⁄4-in. mini die grinder released

Florida Pneumatic Manufacturing Corp. recently released the Aircat 6205 1⁄4-in. Mini Die Grinder. The tool features a .3 HP motor that produces 25,000 RPM. Related Articles – Sonnax highlights Chrysler RFE Sure Cure kits – Alto introduces Ford 10R series cartridge filter – TransGo highlights 68RFE valve body reprogramming kit The company says that its design provides control

By Alex Crissey
aircat-6205
Sonnax highlights Chrysler RFE Sure Cure kits

Sonnax highlights its Sure Cure kits for replacing worn areas in Chrysler RFE series transmissions. Related Articles – Sonnax introduces three-bolt adapter flange yoke kit – American Powertrain offers Camaro Tremec GM Magnum XL six-speed transmission conversion kit – Premium Guard unveils line of transmission filter kits Part numbers include: These kits cover Chrysler 45RFE,

By Alex Crissey
Alto introduces Ford 10R series cartridge filter

Alto has introduced a new auxiliary pump cartridge filter for Ford 10R60 and 10R80 transmissions. The filter (part no. 242942) fits model years 2017 and on. Related Articles – Sonnax introduces splined stub and sleeve kit – Top 20 Tools and Products: The Winners – GFX announces new underdrive pressure plate

By Alex Crissey
Alto-242942_-1400