In this Together - Transmission Digest

In this Together

The coronavirus pandemic has been hard on our industry. But we aren't the type to stay down.

There’s no doubt that the coronavirus pandemic has affected us all. And though there are signs that we, as a society, will soon be slowly filtering back into our workplaces and out of quarantine, the effects of this event will be felt for months to come.

We here at Transmission Digest don’t take for granted how lucky we are- we have jobs which we can perform from home. Many in our industry don’t have it so easy, and we tip our hats to you brave men and women making things work when society has ground to a near halt.

Shops that have been featured in this magazine – successful shops run by honorable and intelligent men and women – have been seeing these effects firsthand.

“Our business has definitely slowed down. We are usually a week out, but consumer confidence has dipped so low due to the majority of the country being quarantined, most people just aren’t going out and about. Fewer vehicles on the road simply equals fewer vehicles rolling through the doors,” said Justin Fleming of Transmissions Plus Inc, featured in the January issue.

But, in the spirit of the transmission industry, Justin isn’t sitting on his hands during this outbreak. “I see this less as a ‘recovery’ issue as I do a ‘weathering the storm’ issue. This pandemic has essentially blindsided the world. Nobody was prepared for this level of adjustment. All we can do is adapt to the situation and offer what we can where we can to try and help the community. One of the immediate steps we took was to offer free vehicle pick-up and delivery, as some customers may choose to have a contactless experience. With our pick-up and delivery, our customers can authorize work orders and make payment for services remotely, all from the comforts of their home. We have also been taking on work that we normally wouldn’t take.”

Justin also said that the shop has kept close relations with other shops in the area, sending each other referrals. “At the end of the day, we’re all friends and neighbors. We just want to stay open as long as possible, not only to support us, but our community too.”

Our most recent shop feature story, in the April issue, was on G-Force Transmissions in Alaska. When we first spoke to G-Force, Co-Owner Michael Gallagher said, “Nobody up here has it.” Indeed, the virus took a long while to show up in Alaska, but since that time, and before the feature story was even fully written, we spoke with them again and learned that the virus had arrived and was affecting business. Michael said that they had seen a decline in numbers.

No doubt we are all being affected. But to those shops and business out there struggling, know this: you are not alone. Keep in touch with each other, support each other as best as you can, and take it one day at a time.

The pandemic will end, and we’ll return to normalcy one way or another. Until then just remember: we’re in this together.

You May Also Like

Don’t fear customer complaints about CVTs

Continuously Variable Transmissions, or CVTs, are more common than you think. Audi, Subaru, Nissan, Ford, GM and many other automakers use CVT transmissions in cars and SUVs. There is no way to avoid them. Chances are there is one in your shop right now. What does CVT mean for technicians? On the maintenance side, a

CVT-Transmission-2

Continuously Variable Transmissions, or CVTs, are more common than you think. Audi, Subaru, Nissan, Ford, GM and many other automakers use CVT transmissions in cars and SUVs. There is no way to avoid them. Chances are there is one in your shop right now.

What does CVT mean for technicians? On the maintenance side, a CVT requires more or the same frequency of fluid and filter changes as a conventional automatic transmission, and many of the basic procedures are the same. On the diagnostic side, a CVT is less complicated internally than a six- or nine-speed transmission. Diagnostics with a scan tool are about the same. On the service side, while you may never pull a variator or belt out of a CVT, you can service components like sensors, pumps and valve bodies. The point here is not to fear a customer complaint about a CVT. 

2024 State of the Powertrain Industry

The Transmission Digest Annual Survey of Retail Shops has served as benchmark and planning tool for the industry now for the past 38 years. Charts and tables in this study are based on a survey of subscribers that was conducted early this year.  Related Articles – Powertrain industry directory and buyer’s guide 2024 – Shift

state-on-industry-feature-1400
Powertrain industry directory and buyer’s guide 2024

This is the latest in TD’s annual series of directories for the powertrain industry. Companies that supply products to the powertrain aftermarket are listed in alphabetical order. Because data changes frequently, only organizations that have updated information with Transmission Digest in the recent past are included. Related Articles – Shift of the shaft: Diagnosing Chrysler 48RE manual shaft

Powertrain-Industry-Directory
Shift Pointers: A Chrysler 300 no-shift complaint

The case study has to do with a 2009 Chrysler 300 C 5.7L Nag1 RWD with 71,923 miles on it (see Figure 1, above). Related Articles – Top 20 Tools and Products: The Winners – Performance supplier listings 2024 – Shift Pointers: What to do when the 62TE TRS tab breaks It is based on

A guide to common GM, Ford and Nissan programming issues

One of the most common complaints I hear from shops when trying to install a new GM TCM is, “The module will not communicate.” While that might be partially true, by design they won’t communicate until they are programmed. If programming fails, there will be an “E” code set which will help you get to

Other Posts

Complete the 2024 transmission shop survey for a chance to win a gift card

Every year, Transmission Digest conducts the Retail Shop Survey. This survey will take five minutes or less. The results of this survey will appear in the March edition of our Powertrain Bulletin email newsletter, and should serve as a valuable benchmark for your business. Your responses will be kept confidential and reported only in the

Think pink: Curtis Price strikes out on his own and has Liberty Transmission and Auto Care stand out from the crowd

In 2018, Curtis Price, at 43 years old, found himself at a crossroads in his career in the transmission industry: unsure whether he could move up in the family business where he had worked for 20 years, or whether he should start his own. At the time he was working at Price’s Transmission in Virginia

Liberty-Transmission
Hidden problems: Three tales of electrical issues

In this article, I will discuss some vehicles with electrical issues. These issues were previously addressed by a different shop/tech, but the improper or incomplete repair resulted in these hidden problems that would appear later. Related Articles – Valve body and component suppliers: A comprehensive list – Shift Pointers: Failures caused by incorrect tire sizes

Easy TH400, 4L80-E reverse servo setup: Craft your own tool

While not as sensitive as some shifting bands, the Reverse band adjustment on a TH400 or 4L80-E transmission is critical, and failure to get it right has tripped up even the best builders. There is nothing worse than getting the transmission installed, putting it in Reverse and then not going anywhere or having no engine