Products Archives - Page 22 of 30 - Transmission Digest
Sonnax highlights end plug kit for Chrysler valve bodies

Sonnax highlights its o-ringed end plug kit (#85740-01K), which the company says can restore hydraulic control and renew crucial circuit pressures in PBW and PBC Chrysler 948TE and ZF9HP48 valve bodies. According to Sonnax, this drop-in Zip Valve kit services all 6/3 (PBW/PBC) bores where end plug sealing is critical for proper function.

Sonnax O-Ringed End Plug Kit
Sonnax highlights pump gear set for Chrysler 68RFE transmissions

Sonnax highlights its heavy duty outer pump gear set for Chrysler 68RFE transmissions. The company says users can avoid wear in these transmissions’ pump gears by using this pump gear set (#72530B-04K). This set includes two high-pressure gears with an anti-wear coating. Use this set in conjunction with Sonnax center pump gear #72530-02 to replace

Sonnax Heavy Duty Outer Pump Gear Set
Bosch to add new remote OEM diagnostic software capabilities to DVCI scan tools

Bosch announced that it will offer new remote OEM diagnostic software capabilities on its diagnostic vehicle communication interface (DVCI) products, including the Bosch ADS 525X and 625X scan tools. Starting next year, Bosch says its DVCI scan tool users will be able to utilize licensed and authorized OEM diagnostic software remotely on most major vehicle

Bosch-Scan-Tool-600
Alto introduces friction clutch, friction ring for GM 8L90E

Alto has introduced two new products for the General Motors 8L90E transmission: a torque converter friction clutch and a torque converter friction ring. The GM 8L90E torque converter friction clutch (above left) has a x30 bent tooth design and is meant for 2015-2019 6.2L engine applications. GM 8L90E torque converter friction ring (seen above) has a

Sonnax highlights end plug kit for GM 8L90, 8L45

Sonnax highlights its O-ringed end plug kit for GM 8L90 and 8L45 transmissions. According to the company, wear on various OE end plugs in GM 8L45 and 8L90 transmissions allows critical leakage at the following circuits, default override, lube flow regulation and converter lockup/release. These pressure losses impair control of clutches, effect lube flow regulation

Transtar highlights filters for Ford 6F35

Transtar highlights its line of transmission filters for Ford 6F35 transmissions. According to the company, impurities in the transmission can lead to poor clutch application, increased wear and delayed actuation of various components; thus the importance of the filter. Car models covered are as follows:

Transtar-6F35-Pump
Sonnax, Transtar highlight case saver kit for Ford 6F35 transmissions

Sonnax and Transtar highlight the case saver kit for Ford 6F35 transmissions. According to the companies, first- and second- generation 6F35 transmissions are notorious for worn axle bushings, which allow external leakage. This premature bushing wear can be caused by a worn differential support, which affects endplay negatively. The thrust bearing that rides on the

Transtar highlights coolers and warmers for Nissan Versa, Sentra

Transtar highlights its line of coolers and warmers for Nissan vehicles. Models covered are the 2010-2012 Nissan Ventra and the 2013-2018 Nissan Sentra. According to Transtar, the ideal operating temperature for the transmission and fluid is between 160 and 200 degrees Fahrenheit. Transmission fluid cannot be over-cooled, so Transtar suggests adding an aftermarket cooler as

Transtar-Coolers-Warmers-600
Hydramax releases under-dash hydraulic clutch system for Chevrolet C10 trucks

American Powertrain has introduced a new line of Hydramax bolt-in, under-dash Hydraulic Clutch Systems, a kit designed for 1967-1972 Chevy C10 trucks. The kit features an integrated under-dash hydraulic master cylinder and a bolt-in clutch pedal. The included clutch pedal allows for conversion to hydraulic, or an automatic car to manual. The new Hydramax kit

American-Powertrain-Hydramax-C10-600
Sonnax introduces bushing kits for GM transmissions

Sonnax has introduced a line of bushing kits for GM transmissions, which the company says can help avoid bushing failure, harsh shifts, burnt clutches and gear ratio or solenoid codes. Models covered are the GM 6L45/50 (part number #104030-01K) and the GM 6L80/90 (part number #104030A-01K). According to Sonnax, these kits limit bushing wear and

Sonnax-104030-01K-600
Sonnax highlights oversized cooler, main converter and converter relief valve kit

Sonnax highlights its oversized cooler, main converter pressure and converter relief valve kit (#122740-10K) for Aisin Seiki AS66RC and AS69RC transmissions. The company says this kit can help avoid fluid loss that causes poor cooling, low cooler feed, low converter charge, TCC slip and TCC slip codes in these transmissions. Installing this kit re-establishes correct

Sonnax-122740-10K-600
TransTec introduces electronic power steering rack and pinion seal kit for BMW 1 Series

TransTec has released a new Electronic Power Steering (EPS) Rack and Pinion Seal Kit for the BMW 1 Series. Models covered are: Engine type/size: 1.5/1.6/2.0/3.0 Liter Turbo Years: 2011-2019 According to the company, the TransTec electronic rack and pinion seal kit includes everything technicians need for a complete mechanical repair, including all o-rings, metal clad

TransTec-80R079-kit-600