AAPEX announces Joe’s Garage training schedule - Transmission Digest

AAPEX announces Joe’s Garage training schedule

AAPEX has announced the schedule for its technical and business-management training courses in Joe’s Garage, an entire floor of The Venetian Expo dedicated to meeting the needs of today’s service and repair professionals. AAPEX will take place Tuesday, Oct. 31, through Thursday, Nov. 2, in Las Vegas. 

Technical training topics include advanced driver-assistance system (ADAS) calibration; battery electric vehicle (BEV) and hybrid electric vehicle (HEV) services; electronification of the chassis; EVAP diagnostics; J2534 module programming; deciphering gas turbo driveability; and communication breakdown: communication issues, U codes and network diagnostics.

Business-management topics include AI language ChatGPT; dealing with overwhelm; executing successful acquisitions; superior service advising; understanding Gen Z; and attracting, hiring and retaining employees. 

Trainers will include Mike Reynolds, Mobile Automotive Service Solutions; Eric Ziegler, EZ Diagnostic Solutions Inc.; Greg Bunch, Transformers Institute; Jeremy O’Neal, Advisorfix; Richard Falco Jr., Diag on Demand, Trained by Techs and CTI; Rick White, 180BIZ; and Bill Haas and Sara Fraser, Haas Performance Consulting. 

For the complete training schedule and speaker lineup, visit Joe’s Garage Training

The Joe’s Garage training was selected by a panel of shop owners who reviewed more than 150 submissions and identified beginner, intermediate and advanced-level training that would best equip service professionals with the skills to meet the challenges and opportunities of today and tomorrow. The business-management sessions are accredited toward the Automotive Aftermarket Professional (AAP) and Master Automotive Aftermarket Professional (MAAP) designations.

Service professionals may sign up for training when registering for AAPEX. Attendees who already have registered should log in to their registration and add the training. The fee per session is $50.

You May Also Like

DOJ, FTC signal support for MEMA Aftermarket suppliers’ petition

The U.S. Department of Justice (DOJ) and the Federal Trade Commission (FTC) recently submitted support to the U.S. Copyright Office for MEMA Aftermarket Suppliers’ petition for a new exemption to the Digital Millennium Copyright Act (DMCA)’s anti-circumvention provisions. These provisions prohibit bypassing copyright protection systems. MEMA’s proposed exemption would allow consumers to view their vehicle’s

DOJ-FTC-Support-MEMA-Aftermarket-Suppliers-Petition

The U.S. Department of Justice (DOJ) and the Federal Trade Commission (FTC) recently submitted support to the U.S. Copyright Office for MEMA Aftermarket Suppliers’ petition for a new exemption to the Digital Millennium Copyright Act (DMCA)’s anti-circumvention provisions. These provisions prohibit bypassing copyright protection systems. MEMA’s proposed exemption would allow consumers to view their vehicle’s telematics data and share that data with third-party repairers. The DOJ and FTC agreed with MEMA that providing consumers access to their vehicle’s telematics data would pose a minimal threat to copyright holders. They also agreed that this data could be accessed without increasing cybersecurity risks. 

NexaMotion Group opens new Arch Auto Parts store

NexaMotion Group (NMG) announced the opening a new Arch Auto Parts store in Plainview, New York. The new store, opened on March 16 and located at 125 Newtown Road, is the company’s fourth location in Nassau County. Related Articles – NexaMotion Group announces expansions for Transtar products, C&M Auto Parts locations  – Deloitte study: Momentum is

NexaMotion-Group-Opens-New-Arch-Auto-Parts-Store
NexaMotion Group announces expansions for Transtar products, C&M Auto Parts locations 

NexaMotion Group announced expansions for two of its businesses. Transtar Industries is adding general repair product lines in four new markets: Cleveland and Mentor, OH; Pittsburgh, PA; and its newest location in Dallas, TX. In addition, the company announced that C&M Auto Parts has opened two new locations in the New Jersey market. C&M Auto Parts

Transtar
Deloitte study: Momentum is slowing for electrification in the U.S.

The 2024 Global Automotive Consumer Study by Deloitte revealed shifting trends in the automotive sector, highlighting the rise in U.S. consumer interest in internal combustion engine (ICE) vehicles and a decline in hybrid and battery electric vehicle (BEV) purchase intent. The report showed a 9% increase in ICE vehicle purchase intent, reaching 67%, while interest in hybrids

electric car generic
ZF Aftermarket introduced more than 770 new parts in 2023

ZF Aftermarket reports that it released more than 770 new parts over the course of 2023. According to ZF, those parts include 115 part numbers for ZF transmission products, including nearly 70 SACHS torque converters, and four different formulations of ZF Lifeguard e-Fluid for hybrid engines. A wide variety of other car and truck parts

Other Posts

Transtar announces formation of NexaMotion Group

Transtar Holding Company announced the formation of NexaMotion Group. This group will include the automotive aftermarket businesses that serve automotive professionals with parts through distribution and e-commerce solutions, including Transtar Industries, Transend, C&M Auto Parts, King-O-Matic, TransMart, RECON and Pro-King Automotive Products. Related Articles – Al La Rocca passes away – HECAT to cease operations –

Transtar
Al La Rocca passes away

It is with great sorrow that we report the passing of longtime automatic transmission industry veteran Al La Rocca. He started his long career back in 1958 at Allomatic Industry as a plant manager, moving from there to Windsor Products in New Jersey as a production manager. Al continued his career at AJAC Transmission Parts

Obit-LaRocca-600
Road to AAPEX season 2 finale: Where the road ends and the show begins

There’s a magical alchemy in how we get to where we’re going. A dot on the map, a full tank of gas and the open road. We navigate the twists and turns and arrive at our destination. The automotive aftermarket, however, has turned that process into a science with distribution delivering the right part to

HECAT to cease operations

HECAT, Inc., manufacturer of a line of transmission flushing machines, announced last week that it will be ceasing operation at the end of the year. The company has been supplying cooler line flushers for more than 40 years. Related Articles – New drivetrain venture, Standard Drivetrain, formed – Transmission industry equipment listings 2023 – The

Hecat-Inc-600