Alto introduces friction clutch, friction ring for GM 8L90E

Alto introduces friction clutch, friction ring for GM 8L90E

Alto has introduced two new products for the General Motors 8L90E transmission: a torque converter friction clutch and a torque converter friction ring.

The GM 8L90E torque converter friction clutch (above left) has a x30 bent tooth design and is meant for 2015-2019 6.2L engine applications.

GM 8L90E torque converter friction ring (seen above) has a ten-notch design and is made for 2014-2018 5.0L applications.

You May Also Like

Force Control Industries releases transmission fluid for oil shear clutch and brake applications 

Force Control Industries introduced a new private label transmission fluid, which the company says is engineered specifically for oil shear applications. This type F automatic transmission fluid (ATF) is formulated using premium base oils, which the company says it used for thermal stability, viscosity characteristics, and their ability to withstand harsh operating environments. It is

Force Control Industries introduced a new private label transmission fluid, which the company says is engineered specifically for oil shear applications. This type F automatic transmission fluid (ATF) is formulated using premium base oils, which the company says it used for thermal stability, viscosity characteristics, and their ability to withstand harsh operating environments. It is then enriched with a proprietary mix of additives to provide anti-wear protection, oxidation resistance, and viscosity control, to increase efficiency of the components and extend their service life.

TransGo introduces 62TE high pressure kit for vans

TransGo recently released a high pressure tuneless reprogramming kit for 62TE transmissions, model years 2007 and on. The company says it is specifically suited for work and passenger vans like the Ram ProMaster. Related Articles – OTC releases TJHP15 transmission jack  – American Powertrain introduces ProTwin disc clutch for GM, Ford and Mopar – Sonnax

OTC releases TJHP15 transmission jack 

OTC has released the new TJHP15 transmission jack. The jack is air-assisted and has a 1,500-lb. capacity. Related Articles – Snap-on debuts new general service tool set  – Gray Tools introduces insulated hex bit socket set – Alto releases friction and steel module for ZF 6HP transmissions According to the company, features include rugged wall

American Powertrain introduces ProTwin disc clutch for GM, Ford and Mopar

American Powertrain announced that it now offers a new ProTwin twin disc clutch kit for GM, Ford and Mopar performance applications. The kit comes with a billet steel flywheel, pressure plate, two drive discs, floater, flywheel crank bolts, pilot bearing and alignment tool. Each clutch kit comes fully balanced and features 1100 ft./lbs. of torque

Sonnax introduces Smart-Tech clutch kit for GM 4L series

Sonnax has introduced a new Smart-Tech clutch kit for optimizing clutch capacity and guarding against clutch burnup in GM 4L60, 4L60-E, 4L65-E and 4L70-E transmissions. This kit (part no. 77734-01K) includes eight .067-in. BorgWarner high-energy frictions and seven .095-in. Lindered steels recommended for use with Sonnax Smart-Tech input housings. Related Articles – Sonnax introduces heavy-duty

Other Posts

Ford 8F24 mechanical diode failure

Mechanical diode failure in automatic transmissions is not uncommon. As far back as the AODE/4R70 shops have seen this type of failure. In April 2022 an article was published in Transmission Digest called, “The ins and outs of the Hydraulic Selectable One-Way Clutch (SOWC).” This article provided photos of the type of damage this style

Tech-Speak-April-Figure-1-1400
Mayhew introduces 14-piece micro hand tool set

Mayhew Tools has introduced a new 14-piece micro hand tool set. This new set is a compilation of all the current micro line products from Mayhew, including pry bars, picks, hooks, and screwdrivers (Slotted, Phillips, and Torx). Related Articles – Aircat 1⁄4-in. mini die grinder released – Sonnax highlights Chrysler RFE Sure Cure kits – Alto introduces

Aircat 1⁄4-in. mini die grinder released

Florida Pneumatic Manufacturing Corp. recently released the Aircat 6205 1⁄4-in. Mini Die Grinder. The tool features a .3 HP motor that produces 25,000 RPM. Related Articles – TransGo highlights 68RFE valve body reprogramming kit – Sonnax introduces three-bolt adapter flange yoke kit – American Powertrain offers Camaro Tremec GM Magnum XL six-speed transmission conversion kit The

aircat-6205
Sonnax highlights Chrysler RFE Sure Cure kits

Sonnax highlights its Sure Cure kits for replacing worn areas in Chrysler RFE series transmissions. Related Articles – Premium Guard unveils line of transmission filter kits – Sonnax introduces splined stub and sleeve kit – Top 20 Tools and Products: The Winners Part numbers include: These kits cover Chrysler 45RFE, 545RFE, 65RFE, 66RFE and 68RFE transmissions.