TransTec has introduced a new Stator Sleeve Tool Kit, which allows users to remove and replace worn-out GM stator sleeves, allowing them to rebuild the stator support instead of purchasing an aftermarket replacement.
Each kit includes a removal tool and an instruction sheet. Each kit also comes with TransTec’s new replacement sleeves, one of each variations. Additional sleeves are available after purchase of the complete kit.
Alto has introduced a new extension housing seal for a few Ford transmission applications. The models covered by the metal clad seal include: 5R55W/S model years 2002-2010; AODE model years 1992-1995; and 4R70W trucks model years 1993 and on. Basic dimensions are: OD: 2.485in.; HT: 1.265-in. (medium long boot). The Alto part no. is 049406A.
Alto has introduced a new extension housing seal for a few Ford transmission applications. The models covered by the metal clad seal include: 5R55W/S model years 2002-2010; AODE model years 1992-1995; and 4R70W trucks model years 1993 and on.
Basic dimensions are: OD: 2.485in.; HT: 1.265-in. (medium long boot). The Alto part no. is 049406A.
GFX has introduced a new 47-teeth differential gear for Toyota transmissions, including the U660E. According to the company, the product is designed to replace years 2007 and on. Related Articles – Alto releases Ford 5R55W/S wire harness repair kit – GFX announces new pump for Ford 6F35E – Rostra offers variable bleed solenoids for second generation Ford 6F35
Alto has introduced a new aftermarket wire hardness repair kit with wire connectors for Ford 5R55W/S transmissions, model years 2002 to 2010. The Alto part no. is 137505NA. Related Articles – Georend highlights billet aluminum stator for torque converters – Dana announces new line of electric transmissions for trucks and vans – GFX introduces new
GFX has announced a new pump for the Ford 6F35E transmissions. The pump is for generation 2 models and has a snap ring on seal. According to the company, this pump is designed to replace OEM part no. RF9L8P-7A105CB for years 2013 and on. Related Articles – Alto introduces new molded piston for VW, Toyota applications
Rostra announced that it offers 10 NH/NL variable bleed solenoids for bands 1–5 for the Ford 6F35 transmission (second generation). Touting an improved design, Rostra says that these solenoids can achieve improved sensitivity, reduced hysteresis over the OE design and highly accurate pressure control in the 6F35. Related Articles – Alto launches new Mazda torque
The kitting of transmission parts has made profitable shop operation possible. When a kit with 100 parts is necessary, a distributor has already assembled all the important components into the kit and it is typically sitting on the shelf ready to be delivered. Kitting saves time and effort for both the shop and the supplying
Sonnax has introduced a new drop-in S4 clutch control valve kit for GM 8L45 and 8L90 transmissions. Sonnax says users can replace worn parts with this kit (part no. 154740-24K) to restore proper hydraulic control and renew clutch apply fluid pressure performance. Related Articles – Alto introduces new kits for 10-speed Ford, Allison transmissions –
Alto recently announced two new bushing kits for 10-speed transmissions. Related Articles – Alto introduces bushing for Mercedes 722.6 – Solera launches Identifix Shop Manager – TransTec extends coverage for 9T overhaul kits The first is an 11-piece bi-metal bushing kit for the 10-speed Ford 10R60 transmission, model years 2020 and on. The various pieces
Raybestos Powertrain announced a new complete unit GPZ friction clutch pack module and a new steel clutch pack module for the Hyundai / Kia A8LR1 transmission. Related Articles – Alto releases spring retainer, filter screw for 68FRE – TransTec offers 8HP50/850RE overhaul kit – Alto adds friction and steel clutches for ZF differentials The RGPZ-287
