Transmission Repair, Transmission Performance - Transmission Digest

Transmission Repair, Transmission Performance

A look at Superior Transmission and Auto Repair in Heber Springs, Arkansas.

Superior Transmission and Auto Repair is located in the quiet town of Heber Springs, Arkansas. It is well-known in the state as both a retirement community and a tourist town, because of its proximity to Greers Ferry Lake, a popular vacation spot.

But while the shop does take in general repair work from community members and rebuild transmissions for the tourists while they swim in the lake or fish for bass, Superior also is known to do work on drag racers and muscle cars.

This wide range of service is intriguing, but why should a customer bring in their vehicle, whether it be 10-second dragster or a hour-long-commute sedan?

“We’re the best,” proudly proclaimed owner Mike Woods.

Mike is familiar with Transmission Digest; he was sweeping the floors of Delta Transmission in Conway, Ark., when we first covered the shop in 2000.

Much like many of the small-town shops we explore in Transmission Digest, Superior Transmission is a family business.

“My sons work here – 22 and 16. The 16-year-old works here after school and on the weekends. My father-in-law owns Delta Transmission in Conway. I started working for him when I was about 18 or 19. My wife works here part time. We started the shop about five years ago We had about 800 bucks to open it and we opened with old used telephone poles for legs and built a stand and a building bench and we had an old kitchen sink for a wash vat.”

The shop he works out of had previously been part of a Chevrolet dealership when he began working out of it. It’s a 16-bay shop with three rotary lifts and three drive-on.

“Two years later we bought it and it’s been going real good. We’ve got five employees; we’ve got real equipment now, real building benches and no more kitchen sinks.”

And what brought him specifically to transmission work?

“I don’t know- it was just a job at first, and I just liked it- it was fun,” he said.

But transmissions weren’t the end of the line. Performance quickly became a daily source of revenue for the shop as well.

“I’ve got drag trucks and we do Rhino Liners too,” Mike said.

But he doesn’t really consider himself a “car guy”- it isn’t a romantic thing for him. He said that there wasn’t a vehicle he owned that he wouldn’t mind selling. But the performance work is nothing if not lucrative.

“We just took in a $25,000 job on a Blazer unit for a gentleman. I’ve got drag trucks and racecars- and I don’t even like working on them anymore to be honest with you. I like to supervise on them now,” Mike said.

The shop does three to four transmission rebuilds per week, with a good helping of smaller general repair jobs and performance upgrades.

He said that the general repair was fairly new addition to the shop, after hiring on a general repair technician, and that it’s good for more than one reason.

“It’s been really lucrative, and it keeps you from getting burnt out on transmissions,” Mike said.

But it isn’t just the diversity of work that drives customers to the door: it’s the dedication.

“Do what’s right even when it hurts. In a small-town word travels fast,” Mike said, and that he’d done some jobs that he didn’t necessarily want but didn’t want any bad word of mouth going around town.

Mike said that all of his employees simply grew up working with cars and have acquired their technical ability through experience. His philosophy for keeping his crew working well together and working hard is all about fair treatment and little incentives. “Well, we live in a tourist community- it’s a lake town, so I find in the summertime, if all the work’s done and it’s 3 o’clock, let them leave and go to the lake. And pay them. I mean, if everything’s done, you know, they’ve worked hard all week, just let them go and pay them- don’t dock them time the second they walk out the door.”

It’s apparently worked, as Mike reported: “I’ve only ever fired one employee.”

Mike said that one of the quirks of working in Heber is that he finds that his shop is busiest when other shops are very slow- Christmas, Thanksgiving and other holidays in what some would consider the “off-season,” though he said he isn’t entirely sure why. He said it likely has something to do with the tourism in town- people travel to the area to celebrate only to have vehicular problems on the way in.

You May Also Like

Shift of the shaft: Diagnosing Chrysler 48RE manual shaft issues

The TorqueFlite transmission has been around since mid-to-late 1950s. There have been many changes surrounding the manual shaft and rooster comb through the years. This transmission shaft controls the position of the manual valve that directs oil for the gear ranges, but it also is used for a Reverse light control as well as Park/Neutral

The TorqueFlite transmission has been around since mid-to-late 1950s. There have been many changes surrounding the manual shaft and rooster comb through the years. This transmission shaft controls the position of the manual valve that directs oil for the gear ranges, but it also is used for a Reverse light control as well as Park/Neutral safety control. As it evolved, changes to these safety backup switches caused extra stress against the rooster comb that posed new challenges to the technician. 

Sometimes, a diagnostic code is all you need

With ATSG having the opportunity to help shops solve problems, sometimes we get faced with some real doozies. A shop will call and give us a laundry list of DTCs, leaving us to think someone must have a bulkhead connector unplugged. We then go through the arduous task of deciding which codes prompted other codes

10L80 and 10R80 pump gear differences

You may have seen an article in the August 2023 issue of Transmission Digest called “GM 10L80: A new kind of pump noise,” which goes over how the front cover housing in the 10L80 is fitted with a converter drive gear and idler gear. The idler gear drives the pump’s driven gear, and is press

Top 20 Tools and Products: The Winners

Transmission Digest readers voted during the past several weeks to select this year’s top products and tools from those nominated in our December issue. This year, rather than separate contests, voting was for a combined tool and equipment contest, with 20 winners rather than 10. Winning entries appear in the following images, but are in

top20Feature-1400
Performance supplier listings 2024

Below is TD’s compilation of manufacturers of components, parts, etc. for performance transmissions for 2024. Click the images below for company names and contact information. Related Articles – Jatco JF613E transmission quick reference material – Complete the 2024 transmission shop survey for a chance to win a gift card – Think pink: Curtis Price strikes

Other Posts

American Powertrain introduces ProTwin disc clutch for GM, Ford and Mopar

American Powertrain announced that it now offers a new ProTwin twin disc clutch kit for GM, Ford and Mopar performance applications. The kit comes with a billet steel flywheel, pressure plate, two drive discs, floater, flywheel crank bolts, pilot bearing and alignment tool. Each clutch kit comes fully balanced and features 1100 ft./lbs. of torque

American Powertrain offers Camaro Tremec GM Magnum XL six-speed transmission conversion kit

American Powertrain now offers a Tremec GM Magnum XL six-speed transmission conversion kit for any 2010-2015 fifth-generation Camaro (SS) equipped with a V8 engine. This kit can be purchased with a choice of two gear sets as a replacement for the TR-6060, and is rated at over 700 lb./ft. torque with close to 8,000 RPM shift

APT_5thGenCamaroKit-1400
Hidden problems: Three tales of electrical issues

In this article, I will discuss some vehicles with electrical issues. These issues were previously addressed by a different shop/tech, but the improper or incomplete repair resulted in these hidden problems that would appear later. Related Articles – Easy TH400, 4L80-E reverse servo setup: Craft your own tool – Outgrowing the walls: The story of

Easy TH400, 4L80-E reverse servo setup: Craft your own tool

While not as sensitive as some shifting bands, the Reverse band adjustment on a TH400 or 4L80-E transmission is critical, and failure to get it right has tripped up even the best builders. There is nothing worse than getting the transmission installed, putting it in Reverse and then not going anywhere or having no engine