Clever Engineering
Starting with the 42RLE in 2005, followed by the 41TE in 2007, the engineers cleverly redesigned the valve body to accommodate a variable line-pressure-control solenoid and transducer. Figures 1 and 2 shows how these additional components are situated on the valve body with the 41TE transmission. This also required an additional pass-through case connector, resulting in changes to the case as well.
Changing Converter Designs Change Your Approach
The 10-inch front-wheel-drive Chrysler converter used in the 604 and 606 (41TE & 42LE) transmissions has undergone some changes in recent years. From the outside you can see that the surface of the impeller, smooth on the earlier models, now has dimples (see Figure 1).
You Can’t Rely on the Relay
Chrysler’s 41TE transmission has been in use since 1989, the 42LE since 1993, the 45RFE since 1999 and the 42RLE since 2003. With each of these transmissions having similar electronics, they also have similar diagnostic codes and testing consistencies.
New Does Not Mean Good
As if the transmission industry weren’t difficult already, technicians also have to contend with new or remanufactured products that malfunction right out of the box.
The SB or SSV – What’s The Difference?
Often, DTCs related to the solenoid switch valve (SSV) in any 41TE or 42LE transmission are misinterpreted as a problematic solenoid body (SB). This may be attributed to the use of the word “solenoid” in the code definition. Code 37 is the solenoid switch valve stuck in the TCC position, and 47 is the solenoid switch valve stuck in the L/R position. Either of these will place the transmission in “limp mode.” The solenoid switch valve is not in the solenoid body but in the valve body (see Figure 1).
