Sonnax has released its Smart-Tech big input shaft kit (part no. 22121B-08K), which the company says can prevent input shaft spline-twist and breakage in high-torque Chrysler 47RH, 47RE and 48RE diesel applications.
This kit fits listed converters fitted with a 35-spline turbine hub. The company says that compared to the best 300M 23-spline shafts, the Sonnax input shaft is 35% stronger at both the spline portion and the sealing ring/cross-hole area of the shaft.
Sonnax has released a new stator support bushing (part no. 144036B) for Ford 6F35 transmissions, generations 1 and 2. Sonnax says that users can eliminate spinning and premature deterioration and restore critical clearances in these transmissions by machining the bore and installing this bushing.
Sonnax has released a new stator support bushing (part no. 144036B) for Ford 6F35 transmissions, generations 1 and 2. Sonnax says that users can eliminate spinning and premature deterioration and restore critical clearances in these transmissions by machining the bore and installing this bushing.
Alto has introduced two new products in its intermediate clutch PowerPack line for GM transmissions. Related Articles – Dana offers Spicer end yokes for Allison Transmissions – ATI introduces six-speed Chevy transmission performance package – Sonnax highlights 10L/10R solenoid stabilization retainer, 9T clip insert The first (Alto part no. 031757BHP, pictured above) covers GM 3L80,
Dana Inc. announced that it now offers genuine Spicer automatic transmission end yokes specifically designed for replacement on Allison transmission applications. Related Articles – Georend Transmission adds Ford 6R140 transmission pan kit – Alto introduces 6L45E core – Sonnax introduces new pump vane for Ford and GM transmissions The new Spicer commercial-vehicle automatic transmission end
ATI Performance Products has introduced an externally controlled, six-speed transmission package for Chevrolet vehicles. Related Articles – Rotary introduces XA12 Alignment Scissor Lift – ILI introduces Lubegard engine oil protectant for turbocharged engines – RatioTek introduces new tuner kit for BMW M240, Toyota Supra According to the company, the torque converter, bellhousing, transmission and controller
Sonnax highlights two product lines for helping with heavy solenoids for GM/Ford 10L/10R and 9T series transmissions. Related Articles – Sonnax introduces input housing forward sleeve kit for GM 4L series – Alto releases filter for Nissan GR-6 dual clutch transmissions – Alto introduces steel plate for GM transmissions According to Sonnax, the heavy OE
Sonnax has provided the following guide on critical wear areas and vacuum test locations for the GM 10L series and the Ford 10R series. Technicans working on these models should find the following four pages helpful. Related Articles – Shift Pointers: No ball, no reverse – The multi-functional Clutch 1 in Nissan’s CVT, part 1
This article applies to Chrysler RFE, RLE and TES transmissions that utilize pressure control solenoids (PCS) for line pressure control. The subject is a rather common electrical fault that may occur on the PCS line pressure solenoid circuit, which results in max line pressure. Diagnosis and correction of a max line pressure condition may become
GFX has introduced a variety of new oil pans for several different General Motors transmissions.
GFX has introduced a new hard part for Nissan and General Motors transmissions.
