Sonnax has introduced a line of bushing kits for GM transmissions, which the company says can help avoid bushing failure, harsh shifts, burnt clutches and gear ratio or solenoid codes. Models covered are the GM 6L45/50 (part number #104030-01K) and the GM 6L80/90 (part number #104030A-01K).
According to Sonnax, these kits limit bushing wear and and include upgraded material composition and wear characteristics that help eliminate premature deterioration.
Alto has introduced a new line of friction and steel clutches for ZF differentials, model years 2011 and on. The friction clutches feature Alto’s K2 high-energy material.
Alto has introduced a new line of friction and steel clutches for ZF differentials, model years 2011 and on. The friction clutches feature Alto's K2 high-energy material.
Sonnax has introduced a new oversized low reverse/overdrive (4-5-6) clutch regulator valve kit (part no. 144740-43K) for Ford 6F35 transmissions, generations 1 and 2. Related Articles – ATI introduces new e-clutch hub for ZF8HP51 – Sonnax adds new stator support bushing for Ford 6F35 – Alto adds to intermediate clutch PowerPack line for GM transmissions
ATI Performance Products has introduced its new billet aluminum E-Clutch Hub for fifth generation Toyota Supras and BMW vehicles equipped with ZF8HP51 automatic transmissions. This new ATI part no. 711014 is a direct replacement for the OEM part no. ZF-1101-471-029 and is available now. Related Articles – Dana offers Spicer end yokes for Allison Transmissions
Sonnax has released a new stator support bushing (part no. 144036B) for Ford 6F35 transmissions, generations 1 and 2. Sonnax says that users can eliminate spinning and premature deterioration and restore critical clearances in these transmissions by machining the bore and installing this bushing. Related Articles – Georend Transmission adds Ford 6R140 transmission pan kit
Alto has introduced two new products in its intermediate clutch PowerPack line for GM transmissions. Related Articles – Rotary introduces XA12 Alignment Scissor Lift – ILI introduces Lubegard engine oil protectant for turbocharged engines – RatioTek introduces new tuner kit for BMW M240, Toyota Supra The first (Alto part no. 031757BHP, pictured above) covers GM
Sonnax has provided the following guide on critical wear areas and vacuum test locations for the GM 10L series and the Ford 10R series. Technicans working on these models should find the following four pages helpful. Related Articles – Powertrain industry directory and buyer’s guide 2023 – Shift Pointers: No ball, no reverse – The
Sonnax has introduced a new input housing forward sleeve kit (part no. 77733-52K), which the company says can increase input housing torque capacity and maintain OE forward piston apply area in GM 4L60, 4L60-E, 4L65-E and 4L70-E transmissions. Related Articles – Alto releases filter for Nissan GR-6 dual clutch transmissions – Alto introduces steel plate
Alto has released a new SSP internal sump filter for Nissan applications. The filter fits GR-6 dual clutch transmissions in the Nissan GT-R, model years 2009 and on, and the Alto part number is 209946. Related Articles – GFX adds new hard part for JF015E, REOF11A – Sonnax highlights boost valve kits for Aisin Seiki
This article applies to Chrysler RFE, RLE and TES transmissions that utilize pressure control solenoids (PCS) for line pressure control. The subject is a rather common electrical fault that may occur on the PCS line pressure solenoid circuit, which results in max line pressure. Diagnosis and correction of a max line pressure condition may become
