Rotary introduces XA12 Alignment Scissor Lift - Transmission Digest

Rotary introduces XA12 Alignment Scissor Lift

Rotary announced the release of the new XA12 Alignment Scissor Lift, a small bay alignment lift with a large four-wheel alignment wheelbase range.

The lift has a 78- to 164-inch four-wheel alignment wheelbase range and 12,000-pound lifting capacity. It has a minimum bay size footprint of 12 by 23 feet and adjustable radius gauges that to configure short and long wheelbases.

The alignment scissor lift also comes standard with two 6,000-lb.capacity air-operated rolling jacks, longer rear slip plates and hinged ramps that automatically self-chock and drop down when the lift is raised, the company notes. Rotary also touts the fact that its open front and rear design provide technicians with greater access to vehicle adjustment points making wheel alignments and other repairs easier to perform.   

You May Also Like

TransGo releases S4 regulator valve for 2018-on GM 8L45, 8L90

TransGo highlights its new oversize S4 regulator valve for 2018-on GM 8L45 and 8L90 transmissions. According to TransGo, when General Motors made a change to the S4 regulator valve in both the 8L45 and 8L90 transmissions, the updated two-land design and computer command strategy resulted in significant increased wear, even at low mileage. TransGo says

TransGo-8L90-S4LATE-TK-1400

TransGo highlights its new oversize S4 regulator valve for 2018-on GM 8L45 and 8L90 transmissions.

According to TransGo, when General Motors made a change to the S4 regulator valve in both the 8L45 and 8L90 transmissions, the updated two-land design and computer command strategy resulted in significant increased wear, even at low mileage.

American Powertrain introduces new transmission install tool and seal protector

American Powertrain has introduced a new seal protector and install tool, now included with every Tremec TKX and Magnum transmission kit the company sells. It is also available as a standalone product. Related Articles – Mayhew introduces 14-piece micro hand tool set – Aircat 1⁄4-in. mini die grinder released – Sonnax highlights Chrysler RFE Sure Cure kits

Mayhew introduces 14-piece micro hand tool set

Mayhew Tools has introduced a new 14-piece micro hand tool set. This new set is a compilation of all the current micro line products from Mayhew, including pry bars, picks, hooks, and screwdrivers (Slotted, Phillips, and Torx). Related Articles – Alto introduces Ford 10R series cartridge filter – TransGo highlights 68RFE valve body reprogramming kit –

Aircat 1⁄4-in. mini die grinder released

Florida Pneumatic Manufacturing Corp. recently released the Aircat 6205 1⁄4-in. Mini Die Grinder. The tool features a .3 HP motor that produces 25,000 RPM. Related Articles – American Powertrain offers Camaro Tremec GM Magnum XL six-speed transmission conversion kit – Premium Guard unveils line of transmission filter kits – Sonnax introduces splined stub and sleeve kit

aircat-6205
Sonnax highlights Chrysler RFE Sure Cure kits

Sonnax highlights its Sure Cure kits for replacing worn areas in Chrysler RFE series transmissions. Related Articles – Top 20 Tools and Products: The Winners – GFX announces new underdrive pressure plate – Sonnax highlights TH400 heavy and extreme duty input shafts  Part numbers include: These kits cover Chrysler 45RFE, 545RFE, 65RFE, 66RFE and 68RFE transmissions.

Other Posts

Dorman introduces transmission oil cooler bypass valve

Among new products released by Dorman is a transmission oil cooler bypass valve, designed for specific Chevrolet, GMC and Cadillac SUVs and pickup trucks. This product is intended to address issues like overheating, insufficient heat generation, or fluid leaks in transmissions, Dorman said. Made from solid aluminum billet, the valve features an additional access port

Dorman-Products-building-HQ
Sonnax introduces TCC signal damper piston kit for Ford, GM 10-speeds

Sonnax has introduced a new TCC signal damper piston kit for GM and Ford 10-speed transmissions. Sonnax says this kit can correct the operation of the converter in GM 10L80/90 (Gen. 1) and Ford 10R60/80 transmissions. Related Articles – PRT Heavy Duty to exhibit at HDAW – TransTec launches 8F24 overhaul kit – Transtar launches Transmaxx

PRT launches new complete strut assemblies

PRT has announced the launch of new complete strut assemblies for light vehicles, SUVs and pickup trucks in the North American aftermarket. The launches include models such as Honda Civic, Jeep Cherokee and Toyota Highlander, in addition to brand new applications such as the 2021 Subaru Forester, the 2021 Toyota Corolla, and the 2021 Honda

PRT-Strut-1400
TransTec releases 6L80/90 Case Saver

TransTec has released a new Case Saver for 6L80 and 6L90 transmissions. Related Articles – Sonnax introduces new piston for ZF, Ford six-speed transmissions – Snap-on announces upgrades in diagnostic software release – Alto releases bushing kit for 10-speed transmissions According to the company, Case Saver is a preventative tool that helps guard against inner

TransTec-Case-Saver.-1400jpg