Hyundai/Kia Torque Converter Clutches - Transmission Digest

Hyundai/Kia Torque Converter Clutches

Alto Products Corp. has announced four new one-sided friction clutch plates for the Hyundai/Kia A6LF1/2/3, A5HF1, and A6GF1 Torque Converters. Alto p/n 213714A and 213716A (A6LF1/2/3) feature the company’s G3 friction material, which is engineered to be durable for high-performance and converter applications. Alto p/n 213718A and 213720A (A5HF1, A6GF1) feature K2 high-energy friction material, designed for many different friction applications. 

You May Also Like

Sonnax highlights 1350 Series three-bolt adapter flange yoke kit

Sonnax highlights its three-bolt adapter flange yoke kit for the following transmissions: 6L80, 6L90, 8L90, 10L80 units, TR6060, TR3160 manual units. It also fits 2005–2006 Pontiac GTO (differential side). According to Sonnax, users can effectively replace weak giubo and two-piece driveshafts with a one-piece, u-joint style driveline by installing this kit (part no. T35-GMFD-01K).

Sonnax highlights its three-bolt adapter flange yoke kit for the following transmissions: 6L80, 6L90, 8L90, 10L80 units, TR6060, TR3160 manual units. It also fits 2005–2006 Pontiac GTO (differential side).

According to Sonnax, users can effectively replace weak giubo and two-piece driveshafts with a one-piece, u-joint style driveline by installing this kit (part no. T35-GMFD-01K).

Autel tablets approved for Nissan Central Gateway access

Autel has announced that its tablets have been approved for Nissan Central Gateway (CGW) access via AutoAuth, the aftermarket tool OE-authentication service, enabling registered users to access secured systems and perform complete diagnostics on certain late-model Nissans. Related Articles – Snap-on offers pliers racks for organization  – Alto releases 68RFE low-reverse sprag assembly – Sonnax

Autel-Nissan-auto-auth
Snap-on offers pliers racks for organization 

Snap-on has introduced a line of three pliers racks, to offer storage solutions for automotive repair shops. Related Articles – Berkeley Standard introduces JFO11E / REOFO10A remanufactured pulley set – Alto releases GM to Volvo differential conversion kit – Sonnax introduces Ford 10R140 TCC signal damper piston kit Three pliers racks (part no. PLRK21, PLRK27,

snap-on-pliers-rack
Alto releases 68RFE low-reverse sprag assembly

Alto has released a low-reverse sprag assembly for the Chrysler 68RFE transmission, model years 2007 and on—14 roller, 36 spline. Related Articles – Toledo Trans-Kit 10L transmissions now available – Alto introduces new filter for Toyota AB60E/F – Rostra highlights GM 8L90 speed sensor, harness assembly

Alto-GM-4T60E,-4T65E,-Differential-Conversion-Kit-1400
Sonnax introduces Ford 6R center support sleeve

Sonnax has introduced a hardened steel center support sleeve for Ford 6R60, 6R75 and 2009–later 6R80 transmissions. According to the company, users can restore proper hydraulic control and prevent future wear in these transmissions caused by the 3-5-R “B” clutch housing sealing rings by machining 2-6 “C” clutch housing bore (center support) and installing this

Other Posts
6R80 whirring noise: TCC slip or engine surge?

About a month ago, we at Certified Transmission received a 2015 Ford Expedition 4WD at the shop. It was equipped with a 3.5L Turbo V6 engine and a 6R80 transmission. The complaint read, “RPMs fluctuate up and down and there is a whirring noise.” The vehicle was brought to us by one of our wholesale

American Powertrain adds GearStar automatic transmissions for Ford, Chevy, Mopar

American Powertrain announced that it has added GearStar automatic transmissions for Ford, Chevy, and Mopar. Transmissions include the 4L60E for SBC, BBC and early LT engines; the 4L65E for LS and late LT engines; SB and BB Mopar and Gen III engines; the 4L80E for LS engines; and late model LTs and the 4R70W for Ford small block engines.  Related Articles

The torque converter can of worms: Lockup and aftermarket programming

Lockup torque converters have been around now for some time. They came into production around the time when fuel mileage demands were put into effect by the government, and the auto manufacturers needed to do something to better connect the fluid coupling (torque converter) of the automatic transmission to the motor. By doing this, OEMs

tascfeature-1400
PRT launches 59 new complete strut assemblies

PRT announced the launch of 59 new complete strut assemblies for the North American market. Related Articles – BendPak announces upgraded Litestix work light – Sonnax introduces TCC apply limit switch valve kits for Chrysler RFE series – Schaeffler offers new LuK clutch kits The launch includes application coverage for Nissan Frontier, Toyota Highlander and Mercedes E-Class