GM 4L80/85-E 2-3 Accumulator Spring - Transmission Digest

GM 4L80/85-E 2-3 Accumulator Spring

This new Sonnax 2-3 accumulator spring (p/n 34931-01) for GM 4L80/85-E units is a direct replacement spring that has been stress relieved and shot-peened for increased durability compared to factory springs.

You May Also Like

Snap-on offers pliers racks for organization 

Snap-on has introduced a line of three pliers racks, to offer storage solutions for automotive repair shops. Three pliers racks (part no. PLRK21, PLRK27, and PLRK30) are offered in 21-, 27-, and 30-in. sizes. The company notes that they are American made and are offered in a range of colors. The PLRK21 has 14 wide

snap-on-pliers-rack

Snap-on has introduced a line of three pliers racks, to offer storage solutions for automotive repair shops.

Three pliers racks (part no. PLRK21, PLRK27, and PLRK30) are offered in 21-, 27-, and 30-in. sizes. The company notes that they are American made and are offered in a range of colors. The PLRK21 has 14 wide slots and four narrow slots, the PLRK27 offers 17 wide slots and six narrow slots, and the PLRK30 features 19 wide slots and seven narrow slots.

Alto releases 68RFE low-reverse sprag assembly

Alto has released a low-reverse sprag assembly for the Chrysler 68RFE transmission, model years 2007 and on—14 roller, 36 spline. Related Articles – Sonnax introduces Ford 6R center support sleeve – Berkeley Standard introduces JFO11E / REOFO10A remanufactured pulley set – Alto releases GM to Volvo differential conversion kit

Alto-GM-4T60E,-4T65E,-Differential-Conversion-Kit-1400
Sonnax introduces Ford 6R center support sleeve

Sonnax has introduced a hardened steel center support sleeve for Ford 6R60, 6R75 and 2009–later 6R80 transmissions. According to the company, users can restore proper hydraulic control and prevent future wear in these transmissions caused by the 3-5-R “B” clutch housing sealing rings by machining 2-6 “C” clutch housing bore (center support) and installing this

Berkeley Standard introduces JFO11E / REOFO10A remanufactured pulley set

Berkeley Standard has introduced a new remanufactured pulley set for the Jatco/Nissan JFO11E / REOFO10A continuously variable transmission. Related Articles – Rostra highlights GM 8L90 speed sensor, harness assembly – TransGo releases Allison valve body kit – Sonnax introduces oversized cooler/lube flow control valve kit According to the company, this set includes the drive pulley,

Berkeley-Standard-3-1400
Alto releases GM to Volvo differential conversion kit

Alto has released a new differential conversion kit from GM to Volvo, for GM 4T60E and 4T65E transmissions. Model years 1992 and on are covered. The kit comes with 55.63mm OD and 59.69mm OD bearings, Alto said. Related Articles – Schaeffler releases TorCon 6L80 torque converter – American Powertrain adds GearStar automatic transmissions for Ford, Chevy,

Alto-GM-4T60E,-4T65E,-Differential-Conversion-Kit-1400
Other Posts
GM 9T series: Critical wear areas, vacuum test locations

Sonnax has provided the following guide on critical wear areas and vacuum test locations for the GM 9T series of transmissions. Technicians working on these models should find this guide helpful. Related Articles – Solving a 4L60E acceleration shudder puzzle – 10R80 aches and pains: Unintentional park hold – The transmission repair industry: Globally integrated

TASC-Tip-1400
The torque converter can of worms: Lockup and aftermarket programming

Lockup torque converters have been around now for some time. They came into production around the time when fuel mileage demands were put into effect by the government, and the auto manufacturers needed to do something to better connect the fluid coupling (torque converter) of the automatic transmission to the motor. By doing this, OEMs

tascfeature-1400
Raybestos adds new Toyota UA80 / UB80 converter clutch plates

Raybestos has introduced a series of Toyota UA80 and UB80 converter clutch plates. They include: Related Articles – Sonnax introduces drop-in 4-5-6 sleeved accumulator piston kit for GM 6T series – BendPak announces upgraded Litestix work light – Sonnax introduces TCC apply limit switch valve kits for Chrysler RFE series

Sonnax introduces drop-in 4-5-6 sleeved accumulator piston kit for GM 6T series

Sonnax has introduced a drop-in 4-5-6 sleeved accumulator piston kit (part no. 124740-68K). The company says users can recover hydraulic control and renew shift feel and performance in GM 6T70, 6T75, 6T80 (Gen. 2) transmissions by installing this kit. Related Articles – Schaeffler offers new LuK clutch kits – Transtar to offer recycled engines –