Getting Your Cores Back - Transmission Digest

Getting Your Cores Back

When torque converters first transitioned from the early bolt-together units to the welded/sealed units of the present day, transmission shops were faced with a new challenge. Most customers weren’t willing to pay for a new OEM converter on top of the cost of a transmission overhaul. The only alternative available at that time – reusing the customer’s original converter – seldom saved the customer or the transmission shop any money. More often than not, reusing the original converter created new problems when contamination from the original failure entered the newly overhauled transmission.

Getting Your Cores Back

Torque Converter Tech Tips

Author: Ed Lee

Torque Converter Tech Tips

  • Author: Ed Lee

When torque converters first transitioned from the early bolt-together units to the welded/sealed units of the present day, transmission shops were faced with a new challenge. Most customers weren’t willing to pay for a new OEM converter on top of the cost of a transmission overhaul. The only alternative available at that time – reusing the customer’s original converter – seldom saved the customer or the transmission shop any money. More often than not, reusing the original converter created new problems when contamination from the original failure entered the newly overhauled transmission.

The need for a lower-cost replacement led to the birth of the torque-converter-rebuilding industry. This new industry relied on a good supply of rebuildable cores to meet the needs of its customers. In the early days of the rebuilding industry, cores were plentiful. Over time, the demand for rebuildable cores grew faster than the supply, and prices increased as availability decreased. Torque-converter rebuilders understood the value of tracking and retrieving their customers’ original cores, but few shops had an efficient way to do this.

Dick Lewis from Midwest Converter in Minneapolis has been in the business since 1985 and knows all too well how important it is to get your cores back. In the early days of the E4OD converters, Dick was fortunate enough to buy 100 good cores for $60 each. Five months later Dick could account for only 20 of the original 100 cores. He realized he couldn’t continue to replace valuable cores at that rate and decided to do something about it. Dick created a very efficient program for tracking both the converter and the core that was created by the sale of the converter.

When a customer calls, an order log is created. The sample order log in Figure 1 shows the shipping method, customer name, converter part number and quantity ordered. It also shows the invoice identification and the dates and times the orders were taken and printed. Next, the invoice and the bar code are created. The bar code appears in the upper-right corner of the invoice (see Figure 2). The line items for that bar code are automatically placed on the invoice, and the serial numbers for each converter that is being delivered are entered on the lower left of the invoice. You may select a line item or a ship method with all invoices created for the same shipping method at one time.

If there are core charges on the invoice, the system will create an orange core-charge label for each box (see Figure 3) and a credit memo for each converter that will be returned for a credit (see Figure 4). That same bar-code information also appears on the core-charge label and the credit memo.

Simply scanning the bar code when the converter is returned starts the return process and the proper method of refund. The serial numbers that are on the lower left of the invoice originate on the converters. They are computer-generated and put on the converter by a dot-peen gun. The printed label on the converter during the marking process guarantees accuracy. Those serial numbers may be used to find the production date, the part number, the date the converter was sold, the customer’s name, the invoice number and the shipping method. The system also will track any future transactions that occur with the same serial number. For instance, if the converter is returned unused and later sold to another customer, or if the converter is returned for any warranty issue, Dick’s system will pick up this information.

Most customers have come to realize that the core charges they are asked to pay help to guarantee a good stock of rebuilt converters when they are needed.

Dick Lewis has created a great core return system, and we thank him for telling the industry about it.

Ed Lee is a Sonnax technical specialist who concentrates on issues of interest to torque-converter rebuilders. ©2006 Sonnax Industries Inc.

You May Also Like

Sherlock Holmes Approach to an AB60 No-Move Situation

The effectiveness in diagnosing automatic transmission malfunctions is an art form. Although there are similarities among the wide varieties of transmissions on the road, each transmission has its own peculiarities. Aside from having mechanical, hydraulic, and electrical hardware systems to contend with, software/programming issues and various vehicle platforms make diagnostics much more difficult.  Using scopes provides

ab60

The effectiveness in diagnosing automatic transmission malfunctions is an art form. Although there are similarities among the wide varieties of transmissions on the road, each transmission has its own peculiarities. Aside from having mechanical, hydraulic, and electrical hardware systems to contend with, software/programming issues and various vehicle platforms make diagnostics much more difficult. 

GM 6T40 Pump Identification Guide

The 6T40 was introduced in 2008 for General Motors front-wheel-drive cars in the Chevrolet Malibu and has gone through several changes throughout its three generations, specifically in the pump area. The 6T40 is closely related to the more lightweight 6T30 and the heavier duty 6T45 and 6T50. Generation one started phasing out during the 2012

Seeing the Forest AND the Trees

They say that the proverbial phrase “I couldn’t see the forest for the trees” means that a person or organization cannot see the big picture because it focuses too much on the details. Related Articles – 4L60E Harsh 1-2 Shift – TASC Force Tips: Diagnosing 8L45 & 8L90 Shift Complaints – TASC Force Tips: Hydraulics

The Manifold Pipeway

The Honda six-speed transmission has been on the bench of many specialty shops for one reason or another (figure 1). But, for those of you who have yet to lay your hands on one, mounted on the upper side of the unit is one of the largest, if not the largest solenoid and pressure switch

8L90 Vacuum Testing

Below are the diagrams for vacuum testing GM 8L90 transmissions. Note: OE valves are shown in rest position and should be tested in rest position unless otherwise indicated. Test locations are pointed to with an arrow. Springs are not shown for visual clarity. A low vacuum reading indicates wear. For specific vacuum test information, refer

Other Posts

Alto introduces 6L45E core

Alto has introduced a new TEHCM core for GM/BMW 6L45E models. The Alto part number is 201550ND, and the OEM printed-on part number is 24241382. Related Articles – Sonnax introduces Smart-Tech clutch kit for GM 4L series – Snap-on debuts new general service tool set  – Gray Tools introduces insulated hex bit socket set

Alto-TEHCM-Core-1400
Alto introduces new cores

Alto has introduced new OEM TEHCM cores covering several different applications. GM, BMW 6L45E models are covered by Alto #201550NDOEM (OEM #24241382), while GM 6L80E and 6L90E models are covered by Alto #195575AUC (OEM part #24270598, pictured above). Related Articles – Alto releases friction and steel module for ZF 6HP transmissions – Sonnax introduces oversized low

Critical Wear Areas & Vacuum Test Locations for FORD 6R80/6R100

Note: OE valves are shown in rest position and should be tested in rest position unless otherwise indicated. Test locations are noted with an arrow. Springs are not shown for visual clarity. Low vacuum reading indicates wear. For specific vacuum test information, visit www.sonnax.com. Related Articles – Hydraulics Fundamentals: Shift & Relay Valves – Another

Hydraulics Fundamentals: Shift & Relay Valves

Shift valves and relay valves share a lot of the same duties. This article is one of a series by Sonnax exploring how valves and hydraulic circuits work and what results when they quit functioning correctly.