Chicago Pneumatic introduces cordless impact wrench

Chicago Pneumatic introduces cordless impact wrench

Chicago Pneumatic has launched a new 1⁄2-in. cordless impact wrench, the CP8854 series. According to the company, the wrench is made for tire changing and quick service wheel applications on light vehicles including cars and vans.

Mechanics can use the wrench to remove wheels quickly for access to brakes, suspension and shock absorbers, and with a built-in shut off feature, techs can then pre-tighten wheel nuts with no risk of over-tightening, the company says.

The wrench weighs in at 5.51 lbs., a length of 7.44 in., and includes the following features:

  • 780 lb-ft. of torque at a speed of 4500 RPM
  • One-hand reverse system
  • Bi-material handle
  • Minimal vibration levels of 9.3 m/s2
  • A friction ring socket retainer
  • An elastomer cover and over-heating protection

You May Also Like

Sonnax introduces low/reverse sprag rebuild kit for Chrysler 68RFE

Sonnax highlights its low/reverse sprag rebuild kit for Chrysler 68RFE transmissions. The company says this kit (part no. 72642SK) allows replacement of the end caps, low/reverse sprag elements and retainer plates without needing to buy a full sprag assembly.

Sonnax-72642SK

Sonnax highlights its low/reverse sprag rebuild kit for Chrysler 68RFE transmissions. The company says this kit (part no. 72642SK) allows replacement of the end caps, low/reverse sprag elements and retainer plates without needing to buy a full sprag assembly.

Alto introduces new extension housing seal for Ford 5R55W/S, AODE, 4R70W

Alto has introduced a new extension housing seal for a few Ford transmission applications. The models covered by the metal clad seal include: 5R55W/S model years 2002-2010; AODE model years 1992-1995; and 4R70W trucks model years 1993 and on.  Related Articles – GFX announces 47-teeth differential gear for Toyota transmissions – Alto releases Ford 5R55W/S wire harness

Alto-Ford-Extension-Housing-Seal-1400
GFX announces 47-teeth differential gear for Toyota transmissions

GFX has introduced a new 47-teeth differential gear for Toyota transmissions, including the U660E. According to the company, the product is designed to replace years 2007 and on. Related Articles – Rostra offers variable bleed solenoids for second generation Ford 6F35 – Georend highlights billet aluminum stator for torque converters – Dana announces new line of electric transmissions

GFX-differential-gear-Toyota-600
Alto releases Ford 5R55W/S wire harness repair kit

Alto has introduced a new aftermarket wire hardness repair kit with wire connectors for Ford 5R55W/S transmissions, model years 2002 to 2010. The Alto part no. is 137505NA. Related Articles – GFX introduces new filter for Dodge, Isuzu, Hino, Mitsubishi Fuso vehicles – Alto introduces new molded piston for VW, Toyota applications – Alto adds

Alto-Ford-Wire-Harness-1400
GFX announces new pump for Ford 6F35E

GFX has announced a new pump for the Ford 6F35E transmissions. The pump is for generation 2 models and has a snap ring on seal. According to the company, this pump is designed to replace OEM part no. RF9L8P-7A105CB for years 2013 and on. Related Articles – American Powertrain introduces Chevy/GMC 4×4 Tremec 4050 transmission kit

GFX-Ford-pump-600

Other Posts

Alto adds new torque converter sealing ring set

Alto has introduced a new 25-piece kit of torque converter scarf cut teflon sealing rings for a variety of AW, Volkswagen, Audi, Skoda and Toyota transmissions. Related Articles – Sonnax introduces S4 clutch control valve kit – Alto introduces new kits for 10-speed Ford, Allison transmissions – Raybestos Powertrain introduces new A8LR1 friction and steel

Alto-Torque-Converter-Sealing-Rings-1400
Sonnax introduces S4 clutch control valve kit

Sonnax has introduced a new drop-in S4 clutch control valve kit for GM 8L45 and 8L90 transmissions. Sonnax says users can replace worn parts with this kit (part no. 154740-24K) to restore proper hydraulic control and renew clutch apply fluid pressure performance. Related Articles – Sonnax introduces remanufactured TEHCMs for 6L80/90 – Alto introduces bushing

Alto introduces new kits for 10-speed Ford, Allison transmissions

Alto recently announced two new bushing kits for 10-speed transmissions. Related Articles – TransTec extends coverage for 9T overhaul kits – Alto releases spring retainer, filter screw for 68FRE – TransTec offers 8HP50/850RE overhaul kit The first is an 11-piece bi-metal bushing kit for the 10-speed Ford 10R60 transmission, model years 2020 and on. The

Alto-10R60-Kit-1400
Raybestos Powertrain introduces new A8LR1 friction and steel clutch plates

Raybestos Powertrain announced a new complete unit GPZ friction clutch pack module and a new steel clutch pack module for the Hyundai / Kia A8LR1 transmission. Related Articles – Alto adds friction and steel clutches for ZF differentials – Sonnax adds new clutch regulator valve kit for Ford 6F35 – ATI introduces new e-clutch hub