ATI introduces pressure regulator valve for Powerglide valve B
ATI Performance Products has introduced a new OEM-style pressure regulator valve for Powerglide valve bodies. According to the company, this OEM-style replacement and will work with OEM mating parts with no modifications. The part no. is 203181 and the valve was made in America.
Alto introduces piston kit for Ford, GM 10-speed transmissions
Alto has introduced a new three-piece molded piston kit for Ford and GM 10-speed transmissions. The kit covers Ford 10R80 and GM 10L80/90 transmissions, model years 2017 and on. The Alto part no. is 231670.
TransTec adds new overhaul kits for ZF 8HP75
Freudenberg-NOK has announced the launch of new TransTec overhaul kits for the ZF 8HP75 transmission. According to the company, the TransTec overhaul kit includes everything needed for a complete mechanical repair, including all o-rings, metal clad seals, bushings and gaskets. The kit is available either with or without pistons. Vehicle applications include the following: BMW
CRP Automotive offers new Pentosin automatic transmission fluids
CRP Automotive offers two new Pentosin Automatic Transmission Fluids (ATFs) for Mercedes-Benz, Ford, GM and more. Pentosin ATF 134 FE Plus is made for Mercedes-Benz models from 2017 to today that feature a 9-G Tronic transmission, while Pentosin ATF 64 fluid is a fully-synthetic fluid for Ford and GM applications. Pentosin ATF 134 FE Plus
Sonnax releases boost valve kits for Toyota transmissions
Sonnax has released new drop-in C1 and C4 apply boost valve kits (part numbers 168740-01K and #168740-02K, respectively) for Toyota’s UA80E, UA80F, UB80E and UB80F transmissions. The sleeves in these kits are manufactured from wear-resistant billet aluminum. Sonnax says these kits can prevent wear and restore proper hydraulic control in these Toyota/Lexus transmissions.
Alto introduces new front pump cover for Chrysler RFE models
Alto has introduced a front pump cover for inner and outer o-rings for various Chrysler RFE models. The models covered include:
Sonnax releases splined stub and sleeve kits for performance vehicles
Sonnax highlights its new aluminum splined stub and sleeve kit, which the company says can reliably drive power from the engine and transmission to the differential in modern muscle cars and custom street rod/hot rod vehicles. These kits make it easy to build, balance and service a rugged performance driveshaft for non-slip-yoke applications, since the
American Powertrain offers Tremec TR-4050 kit for Chevy/GMC trucks
American Powertrain now offers a Tremec 4×2 TR-4050 five-speed Pro-Fit HD manual transmission kit designed for 1988-98 Chevy/GMC OBS light- and medium-duty trucks. The Chevy/GMC OBS 4×2 kit includes a short throw White Lightning Shifter designed for the TR-4050, a crossmember adapter bracket that works with the original factory crossmember, bell housing, hydraulic bearing, pilot
GFX announces low-pressure drop oil cooler
GFX has introduced a new low-pressure drop oil cooler for all transmission makes, including heavy-duty application models. According to the company, the product is designed to replace all years.
TransTec introduces stator sleeve tool kit
TransTec has introduced a new Stator Sleeve Tool Kit, which allows users to remove and replace worn-out GM stator sleeves, allowing them to rebuild the stator support instead of purchasing an aftermarket replacement. Each kit includes a removal tool and an instruction sheet. Each kit also comes with TransTec’s new replacement sleeves, one of
GFX introduces filter for Honda CVTs
GFX has introduced a new filter for Honda transmissions, including the KA CVT and KL CVT models. According to the company, the product is designed to replace OEM part no. 25420-5T0-003, years 2014 and up on these transmissions.
Raybestos introduces new steel pressure plate for 4R100 transmissions
Raybestos has introduced a new steel pressure plate for Ford 4R100/E4OD/C6 applications, model years 1989 and on. According to the company, this .125-in. steel pressure plate is meant to replace the .337-in. OE pressure plate. The company says that the full steel plate (part no. 511041), which has 26 teeth, resists breakage and eliminates the