Products Archives - Page 2 of 19 - Transmission Digest
Rotary introduces XA12 Alignment Scissor Lift

Rotary announced the release of the new XA12 Alignment Scissor Lift, a small bay alignment lift with a large four-wheel alignment wheelbase range. The lift has a 78- to 164-inch four-wheel alignment wheelbase range and 12,000-pound lifting capacity. It has a minimum bay size footprint of 12 by 23 feet and adjustable radius gauges that

Rotary-Scissor-lift
ILI introduces Lubegard engine oil protectant for turbocharged engines

International Lubricants, Inc. (ILI), makers of Lubegard automotive branded lubricants, announced the introduction of Lubegard Engine Oil Protectant for Turbocharged Engines (LSPI), available exclusively at AutoZone as of this February. According to the company, Lubegard reduces Low-Speed Pre-Ignition (LSPI) or low-speed engine knock in all turbocharged gasoline direct injection (TGDI) engines. The company notes that

Lubegard-1400
RatioTek introduces new tuner kit for BMW M240, Toyota Supra

RatioTek has introduced a new entry in its Trans Tuner Kit line. The new tuner kit is for ZF8HP51 transmissions with model years 2017 and on, fitting BMW M240 and Toyota Supra models. The eight-speed rear wheel drive kit comes in two varieties: PR and PRX. According to the company, PR kits are designed for

RatioTek-RT-8HP51-PR-kit-photo-1400
Sonnax introduces input housing forward sleeve kit for GM 4L series

Sonnax has introduced a new input housing forward sleeve kit (part no. 77733-52K), which the company says can increase input housing torque capacity and maintain OE forward piston apply area in GM 4L60, 4L60-E, 4L65-E and 4L70-E transmissions. Sonnax suggests using it combination with a Sonnax overrun sleeve to greatly increase the maximum strength of

Sonnax-77733-52K-600
Alto releases filter for Nissan GR-6 dual clutch transmissions

Alto has released a new SSP internal sump filter for Nissan applications. The filter fits GR-6 dual clutch transmissions in the Nissan GT-R, model years 2009 and on, and the Alto part number is 209946.

Alto-Nissan-Internal-Sump-Filter-1400
Alto introduces steel plate for GM transmissions

Alto has introduced a new steel plate for a variety of GM transmissions. Applications covered include the 3L80/TH400, TH375, TH425, TH475, 4L80E and 4L85E for model years 1990 and on. The forward and direct steel plates have 14 teeth and measure .077 in. According to Alto, this updated steel plate has a set of 14

Alto-Steel-Plates-1400
GFX introduces new oil pan lines for various GM transmissions

GFX has introduced a variety of new oil pans for several different General Motors transmissions.

oilpangroup-1400
GFX adds new hard part for JF015E, REOF11A

GFX has introduced a new hard part for Nissan and General Motors transmissions.

Sonnax highlights boost valve kits for Aisin Seiki transmissions

The drop-in K1 apply boost valve kit and lockup boost valve kit are available from Sonnax.

Alto offers filter kit for GM TR-9080 DCT

The kit is for the C8 Corvette, model years 2020 and on.

GFX adds new pump for vintage Powerglide models

GFX announced a new pump component for GM Powerglide models, covering several vintage model years: 1950 through 1973.

GFX-Powerglide-Pump-600
Alto introduces Ford Mustang cartridge filter kit

Alto has introduced a cartridge filter kit for Ford TR-9070 DCT seven-speed models, fitting the Mustang GT500 with 5.0L and 5.2L engines. The filter kit (part no. 239940) comes with an o-ring and five bolts.