Products Archives - Page 19 of 29 - Transmission Digest
Transtar highlights valve kit for Chrysler, Honda/Acura, ZF transmissions

Transtar highlights its solenoid pressure regular valve kit for Chrysler 948TE, ZF9HP49, and Honda and Acura nine-speed transmissions, covering model years 2014 to 2022. According to the company, features of the kit include: A hardcoat anodized aluminum valve that combats premature wear; Highly wear resistant billet sleeve seals bore from wear-related fluid loss that provide

Alto adds new products for Toyota/Lexus, Nissan, Mercedes, Allison, more

Alto has released a wide variety of products this spring; TD’s roundup of all the latest products from the company is below. Filter #207942 This new filter (pictured above) covers Toyota Lexus models AA81E, GS350, IS350, RC350, (Crown Athlete 2.0L) from 2013 to present. Filter #181948B This recently introduced filter covers Nissan/Jatco/Suzuki models RE0F11A (CVT)

TransGo introduces Performance Valve Body Reprogramming Kit for GM 6L series

TransGo has introduced the Performance Valve Body Reprogramming Kit for the GM 6L series. The 6L80 Tow & Pro kit utilizes technology to rework the 2-6, 3-5-R and 4-5-6 clutch regulator and boost valves that the company says will produce quick, clean shifts with increased holding capacity. The kit is made up of drop-in installation parts. Additional

OTC introduces TJH10 high-lift transmission jack

OTC released the new TJH10 1,000-lb. capacity high-lift transmission jack, used for securely positioning a load to remove or install transmissions. The jack features a universal saddle with knobs to adjust the head and secure powertrain components, including transmissions. Features of the TJH10 highlighted by the company include: Meets the newest ASME PASE-2019 safety standards.

Sonnax highlights remanufactured EPC solenoid

Sonnax highlights its remanufactured EPC solenoid #36940E-RRP, which the company says is built to replace failed Ford 5R110W EPC solenoids. Sonnax says its remanufactured solenoids are disassembled, cleaned and tested to meet OE specifications. Sonnax #36940E-RRP includes a new sleeve/valve assembly and plastic end cap; however, an OE core must be supplied.

Sonnax highlights adjustable rear servo pin kit

Sonnax highlights its adjustable rear servo pin kit (part number 34912-01K), which allows users to replace servo pins in GM TH400 and 1995 and earlier 4L80-E transmissions. OE pins have seven different lengths to allow for adjustment of the Low/Reverse band but are no longer available from GM. This pin kit has an adjustment range

Alto introduces new steel plates for GM applications

Alto has introduced a new line of forward and direct .060-in. steel plates for GM applications. Transmissions covered include: 3L80/TH400, TH375, TH425, TH475, 4L80E and 4L85E. According to the company, the early Alto numbers are the late OE design with 8 full teeth and 4 partial teeth. This was done in an effort to reduce

Sonnax highlights signal accumulator piston kit for GM 6T40

Sonnax highlights its drop-in signal accumulator piston kit (part number 144740-40K) for signal accumulators in GM 6T40 (Gen. 2 & 3) transmissions. According to the company, this kit allows repair of the valve channel casting without reaming, and the O-ring provides a positive seal against critical pressure loss even in worn bores.

Sonnax highlights oversized servo pin kit

Sonnax has introduced an oversized servo pin kit (part number 77787-03K) for reconditioned GM 4L60, 4L60-E, 4L65-E and 4L70-E case bores. According to the company, this chromoly steel servo pin matches the longest OE pin length and is fully compatible with OE and aftermarket servos.

Alto introduces new cores

Alto has introduced new OEM TEHCM cores covering several different applications. GM, BMW 6L45E models are covered by Alto #201550NDOEM (OEM #24241382), while GM 6L80E and 6L90E models are covered by Alto #195575AUC (OEM part #24270598, pictured above).

TransTec introduces overhaul kit for Toyota, Volkswagen

TransTec has introduced a new AWF8G30 UB80E/F Overhaul Kit for Toyota and Volkswagen models. It can be ordered either with or without pistons. Toyota models covered include: Camry (2.5L) Years: 2017 and on RAV4 (2.5L) Years: 2018 and on Volkswagen models covered include: Golf (1.4L) Years: 2017-2020 Jetta (1.5L) Years: 2020 and on The kit

Alto introduces ZF bonded valve body plates

Alto has introduced two new lines of ZF bonded valve body plates—one applicable for 845RE, ZF8HP45/70/90 applications; the other for ZF8HP45/50/55/70/75/95 applications. See the Alto website for more information about compatibility, part numbers, etc.