Recent Diagnostic Trends
Sales of 4L60E units that incorporate the input speed sensor (ISS) are on the rise. Because of the increased sales, we are seeing more claims and problems with the sensors used in these units. Codes P0716 (ISS performance) and P0717 (ISS circuit low voltage) seem to be the key troublemakers.
Staying Grounded
As a member of our team of technical advisers, I have come across many different scenarios that have been traced to the improper grounding of a component, or case. There are many different symptoms, but all have a common cause and repair: They are all elated to a grounding problem in an electrical circuit of the vehicle. We always think about the importance of source voltage, but the ground side of the circuit is equally important. As automotive design has evolved over time, the electrical integrity of all control circuits is critical for proper function.
The following cases are some real-world examples of customer complaints, symptoms and repairs that were traced to faulty ground circuits.
Continuity Conundrum
We spend a great deal of time helping installers with electronic-circuit codes for shift solenoids, PC-solenoid codes, input and output speed sensors, and pressure switches. Nearly all vehicles have issues with circuit codes. The focus of this article will be on Chrysler transmissions, as they seem to have more of these types of concerns than other vehicles.
Two- and three-pin harness connectors have been used for quite some time, and they have always been a primary source of circuit problems. The issues with them seem to be getting more prevalent since the vehicles that use them are aging. Loose pin fit and corrosion are the primary causes found with them, and cleaning with a heavy base (baking soda, for example) and a mild steel brush will usually dissolve the corrosion.
Top 10 Problems at Installation Part 2
Our company sells a large quantity of wholesale carry-out units in addition to performing in-house installations. We have a panel of technical advisers that provides guidance for both types of installations, and this article focuses on what we consider to be the top 10 issues that installers face today, based on the data we continually collect.
Top 10 Problems at Installation Part 1
Our company sells a large quantity of wholesale carry-out units in addition to performing in-house installations. We have a panel of technical advisers that provides guidance for both types of installations, and this article focuses on what we consider to be the top 10 issues that installers face today, based on the data we continually collect.
